Chemistry

Balance, Physical
" Sales Code CHEM101"


Technical Data :
Beam : Finest light brass beam
Knife-edges and planes : made of finest agate
Arrestment : to beam and suspensions highly polished metal pillar fitted with six point Arrestment and extended support and single block guide.
Case : Wodden polished case with divided doors.
Maximum Capacity : 250 Gms
Sensitivity : 1mg


Balance, Analytical
" Sales Code CHEM102"

Rapid weighing short triangular beam suitable for research Laboratories for precision work.
Technical Data :
Beam : Triangular short beam gun metal alloy. The rider scale fitted infront of the beam is provided with 100 notches with zero at the centre.
Knife edges and Planes : Made of finest agate.
Arrestment : Vertical raising type.
Stand : All parts of bras
Pans : Chromium plates, slightly concave inwards dia 7.5 cm.
Case : Teak-wood polished case with front slider and two side doors.
Base : Sunmica black board.
Maximum Capacity : 200 gms
Sensitivity : 1/10 mg


Balance, Analytical - Digital
" Sales Code CHEM103"

Capacity: 62 to 210g
Readability: 0.1mg to 1mg


Chemical Balance
" Sales Code CHEM104"

Technical Data :
Beam : Short beam of hard brass. The upper edge divided into 50 scales divisions to each side. Each scale division representing 1/5 mg. Rider on the scale.
Stand : All parts of brass.
Arrestment : Vertical raising type.
Pans : Chromium plated, slightly concave inwards.
Case : Wooden polished case, with front slider and two side doors.
Base : Sunmica black board.
Capacity : 200gms
Sensitivity : 1/5 mg


Double Beam, Balance
" Sales Code CHEM105"
Twin pam balance for accurate and rapid weighing of masses upto 2 Kg when used with supplementry masses. The balance has a cast alloy base and feature angled beams with centre reading poises; undivided tare beam with a poise which slides and rotates for fine adjustment; spring loaded zero adjust compensator; precision ground knives and cross braced aluminium alloy box end beam.
Equipped with facility for under balance weighing.
Beams 0-200g X 10g, 0-10g X 0.1 g Tare 224 g
Pan, stainless steel, 150 mm diameter.


Balance, Triple Beam
" Sales Code CHEM106"

A single pan, low from beam that will weigh upto 2610 gm when used with supplementry mases. the balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses are hung on the end of the beam increasing the capacity by upto 2610gm. and they can be stored in the recessed base when not required with magnetic damping for quick weighing.
Equipped with facility for under balance weighing.
Beams : 0-500 g x 100g; 0-100g x 10g; 0-10g x 0.1g
Supplimentry masses 2 x 1000 gm & 1 x 500gm
Pan, stainless steel, diameter 150mm


Balance Four Beam
" Sales Code CHEM107"

A High Form Balance With Four Beams,Each Provided With A Non-Removable Sliding Mass, Has Total Weighing Capacity Of 311 Gm .No Additional Mass Is Required,Provided With Spring Loaded Zero Compensator And Magnetic Damping.Pan Of 90 Mm With Two Pouring Spouts & Handle .Height To Stirrup Approx 180mm ,A Platform Housed In The Base Can Be Used For Density Determination.
Beams:- 0-200 Gm X 100 Gm
.............0-100 Gm X 10 Gm
.............0- 10 Gm X 1 Gm
.............0- 1 Gm X 0.01 Gm


Balance Dial-O-Matic
" Sales Code CHEM108"

A High Form Balance With Two Beams One Dial And One Vernier Scale
Beams :- 0-200 Gm X 100 Gm
.............0-100 Gm X 10gm
Dial : 0-10 Gm Vernier Scale Reads To 0.01gm.


Balance Mass set, Physical
" Sales Code CHEM109"

Precision of chrome plated in1-2-5 series. Minor fractionals are of aluminium and major fractionals are of Brass, 10mg rider is nickelled, complete box to protect them from loss. Set is in polished wooden box.
Type A B C D
Set of 1 g to 100 100g 200g 500g 1000g


Lever Balance, Dual Scale
" Sales Code CHEM110"

The balance frame is of aluminium casting having three point base with a levelling screws.
The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan.
The changeover is effected by a swing over mass on the pointer arm.
A hook is provided below the pan for relative density and upthrust determinations.
Overall dimentions : 250x320 mm width x height


Balance Air-Damped :
" Sales Code CHEM111"
Aperiodic balance with short and compensatory suspension. Time of ascillation reduced by Air Damping.
Technical Data :
Beam : Short beam of hard gun metal alloy, The upper edge divided into 50 scale divisions to each side.
Each side divisions representing 1/5 mg when placing a 10mg rider on the Scale.
Stand : All brass including capot and base. , Arrestment : Automatic Precision Parallel Arrestmewnt
Knife Edges and planes : Finest agate, accurately ground.
Case : Highly polished, well seasoned teak wood case. , Base : Synethetic Black Board.
Capacity : 200gms , Sensitiveness : 1/10mg , Length of beam : 14 cm , Height of stand : 26.5 cm
Height of Long suspension : 21 cm , Pan Diameter : 7.5 cm


Platform Balance
" Sales Code CHEM112"

Specifications:
Capacity 2010g
Sensitivity 0.1g
Graduations 0-10g, 0.1g increment (upper beam
0-200g, 10g increment (lower beam)
Tare capacity 200g (Optional) Pan Diameter 150mm (stainless steel)