Oscilloscope , 20 Mhz Dual Trace
" Sales
Code PEL1001"
Features :
* Two Simultaneous Sampling Channels At 20 Ms/ S
* Combination Of A True Dso And An Analog Oscilloscope One Touch Change
Over.
* 2 Kilo Words Of Memory Storage/Channel
* Crt Readout And Cursors For Voltage Time And Frequency Measurement
* Direct Print Out Of Screen Display Using Hpgl Commands With Rs-232 Interface.
* Ruggedised Environment Endurance.
* 1mv/Div Sensitivity.
* Two Input Channels, Algebraic Add And Subtract With Ch2 Invt.
* A Sweep
* B Sweep ( Delayed Sweep ), Triggered.
* X-Y Operation
* Read Out / Cursor
* Menu Selection , Data Acquisition For Probe Factor, Smooth On/Off
* Pre-Trigger Observation
* Single Sweep Operation ( Storage Band Width 5 Mhz )
* X2 To X10 Horizontal Expansion In Digital Mode
* Temporary Holding Wave Forms Displayed
* Storing And Recalling A Reference Memory
* Scale Illumination
* Continuous Variable Hold-Off
* Z- Axis Input
* Large Inch Crt With Internal Graticule
* Tv-V,Tv-H Triggering
* Calibrator Out Put For Probe Adjustment
Also Available :
10 Mhz Single Trace Oscilloscope.
25 Mhz Dual Trace Oscilloscope.
30 Mhz Dual Trace Oscilloscope.
60 Mhz Dual Trace Oscilloscope.
40 Mhz Dual Trace Triggered Oscilloscope.
60 Mhz Dual Trace Triggered Oscilloscope.
100 Mhz 2 Channel , 6 Trace Oscilloscope.
100 Mhz 4 Channel , 8 Trace Oscilloscope. . ------------------------------------------
Function Generator
" Sales
Code PEL1002"
Sine , Squar , Triangular Wave.
0 - 10 Volts Variable & 20 Volts Fixed.
Range - 0.1 To 100 Khz , Digital Display.
Function Generator
" Sales
Code PEL1003"
Portable And Versatile Model Providing Sine , Square And Triangular Waves.
The Selection Of Waves Can Be Done By A Band Switch. Technical Specifications :
Sine Wave:
Frequency : 1 Hz To 100 Khz Continously Variable In 5 Decades
Output Impedance : 600 Ohms.
Dial Accuracy : +/- 3% +/- 1°
Output Amplitude : Continously Variable From 0v To 10v (Ptp ) In 3 Decades
.
Squar Wave : Frequency : 1 Hz To 100 Khz Continously Variable In
5 Decades
Output Impedance : 600 Ohms.
Dial Accuracy : +/- 3% +/- 1°
Output Amplitude : 0-10v (Ptp) Continously Variable In 3 Decades Square
Wave
Symmetry : 10% To 90% (Approx )
Rise Time/Fall Time : Better Than 70n Seconds Across 600 Ohms.
Triangular Wave : Frequency : 1 Hz To 100 Khz Continously Variable
In 5 Decades
Output Impedance : 600 Ohms.
Dial Accuracy : +/- 3% +/- 1°
Output Amplitude : 0-10v (Ptp) In Decade Ranges
Power Supply : 230 V , 50 Hz , 7 Watts
Dimension : 29 X 15 X 9 Cm (L X B X H )
Function Generator , With Counter
" Sales
Code PEL1004"
Same As Above With An Additional Facility Of Digital Read Out.
------------------------------------------
Audio , Signal Generator
" Sales
Code PEL1005"
Sine & Square Wave Out Put .
0-30 V P-P Sine.
0-15 V P-P Square.
Range - 1 Hz To 1 Mhz.
------------------------------------------ Digital Frequency Counter
" Sales
Code PEL1006"
From 10 Hz To 10 Mhz.
------------------------------------------
Electronic Educational Trainers Kits
, Teaching Aids And Precision Instruments Covering The Whole Spectrum
Of Electronics & Fiber
Optics
" Sales
Code PEL1007"
These Subjects Are Covered Under Following Topics :
1. Dynamic Demonstrators .
2. Industrial & Power Electronics.
3. Instruments.
4. Control Engineering.
5. Communication.
6. Audio & Video Engineering.
7. Bridges.
8. Net Work Circuit & Electrical Engineering.
9. Linear Circuits.
10. Power Supplies.
11. Basic Digital Electronics.
12. Advanced Digital Electronics.
13. Transistor Amplifier Circuit.
14. Oscillators & Wave Shaping Circuits.
15. Basic Electronic.
16. D.C. Electronics.
17. A.C. Electronics.
18. Amplifiers.
19. Multi Vibrators.
20. Characteristics Devices.
21. Opto Electronic Devices.
22. Application Of Devices.
23. Timers.
24. Designers & Trainers.
25. Op-Amp Applications.
26. Ac/Dc Experimental Bench.
27 . Fiber Optics Traning & Teaching Aids & Kits.
|
