|
|
|
|
|
Set
of Masses, Brass :
" Sales Code PMCH101"
100 Gms. : This improved set comprises
a 10 gms. Wire hanger with nine slotted masses each
of 10 gms. Accuracy ± 5%.
200
Gms. : Comprising
1 hanger 100 gms., 9 slotted weights 100 gms., total 1000
gms. Accuracy ± 3%.
500
Gms. : Comprising
1 hanger 100 gms., 9 slotted weights 100 gms., total 1000
gms. Accuracy ± 3%.
1000
Gms. : Comprising
1 hanger 100 gms., 9 slotted weights 100 gms., total 1000
gms. Accuracy ± 3%.
Slotted Masses Iron :
" Sales
Code PMCH102"
Made
of Cast Iron, black enamelled finish, with large hole in
the centre and small slot designed to prevent masses sliding
of hanger. Accuracy ± 5%.
| Type |
A |
B |
C |
D |
E |
F |
| Mass
(gms.) |
50 |
100 |
200 |
500 |
1000 |
2000 |
Mass
Hangers Iron :
" Sales
Code PMCH103"
Or Iron for masses.
Type |
A |
B |
C |
D |
E |
F |
Mass
(gms.) |
50 |
100 |
200 |
500 |
1000 |
2000 |
Masses, Iron, Metric :
" Sales
Code PMCH104"
Hexagonal
shape with lifting rings, painted.
Mass Wt.
| Type |
A |
B |
C |
D |
E |
F |
G |
| Cap.
(gms) |
50 |
100 |
200 |
500 |
1000 |
2000 |
5000 |
Masses
Hooked Cylindrical :
" Sales
Code PMCH105"
Chromium plated with cylindrical
weight with long hook. Loose or in a wooden box.
| Type |
Capacity |
| A |
10 gms each weight.
Set of 12. |
| B |
20 gms each weight.
Set of 12. |
| C |
50 gms each weight.
Set of 12. |
| D |
100 gms each weight.
Set of 12. |
------------------------------------------
|
|
|
Force Table :
" Sales
Code PMCH106"
For
verifying the laws of composition and resolution of forces,
comprising a machined aluminium table 40 cm dia. Its
raised rim has engine divided scale graduated 360°, on heavy
vertical support rod and tripod base. Complete with 1 ring,
4 sliding
clamp pulleys, 4 weight hangers and 12 weights (2 x 10
gms, 2 x 20 gms, 4 x 50 gms, 4 x 100 gms).
Parallelogram of Forces Apparatus :
" Sales
Code PMCH107"
For
verifying the relation between forces acting at a point.
Board 750 x 500 x 12 mm on battens, with two aluminium pulleys
50 mm diameter, with clamp for mounting in any position;
four S-hooks, scale pan 100 mm diameter. Without masses.
------------------------------------------
Pulleys
Single Plastic :
" Sales
Code PMCH108"
Polypropylene
pulley of diameter 50 mm mounted in an aluminium frame
with hooks.
Single
Metal :
" Sales
Code PMCH109"
Made
of aluminium pulley of diameter 50 mm mounted in brass frame
with hooks.
------------------------------------------
Double
Parallel Plastic :
" Sales
Code PMCH110"
With
two wheels of polypropylene pulleys of diameter 50 mm in
an aluminium frame with hooks.
Double
Parallel Metal :
" Sales
Code PMCH111"
With
two wheels of aluminium pulleys of diameter 50 mm in an brass
frame with hooks.
Triple Parallel Plastic :
" Sales
Code PMCH112"
With
three wheels of polypropylene pulleys of diameter 50 mm in
an aluminium frame with hooks.
Triple
Parallel Metal :
" Sales
Code PMCH113"
With
three wheels of aluminium pulleys of diameter 50 mm in an
brass frame with hooks.
------------------------------------------
Double
in Line Plastic :
" Sales
Code PMCH114"
Two
polypropylene pulleys of diameter 50, 40 mm in an aluminium
frame with two hooks.
Double
in Line Metal :
" Sales
Code PMCH115"
Two
aluminium pulleys of diameter 50, 40 mm in brass frame with
two hooks.
Triple
in Line Plastic :
" Sales
Code PMCH116"
Three
polypropylene pulleys of diameter 50, 40, 30 mm in aluminium
frame with two hooks.
Triple
in Line Metal :
" Sales
Code PMCH117"
Three
aluminium pulleys of diameter 50, 40, 30 mm in brass frame
with two hooks.
------------------------------------------
Differential,
Aluminium :
" Sales
Code PMCH118"
A
one-piece triple pulley with diameters of 38, 51 and 63.5
mm in metal frame with hook.
------------------------------------------
Aluminium,
Single Clamp type :
" Sales
Code PMCH119"
A 50 mm diameter pulley with a
wide groove, mounted in iron frame, designed for clamping
to the edge of a bench with the pulley in a vertical
plane. The clamp will accept a bench top of up to 25
mm thickness.
------------------------------------------
Pulley All Purpose :
" Sales
Code PMCH120"
Aluminium
pulley 50 mm diameter with groove for cord, mounted in iron
frame. The frame is universal type with 2 clamping screws.
The pulley can be clamped in any position on bench, rod upto
13 mm dia. Wall or on table etc.
Pulley Block (Midget Hoist) :
" Sales
Code PMCH121"
Tested
to 680 Kg. For safe working load of 225 Kg. Two four blocks
lubricating wheels 32 mm diameter safety hooks at top and
bottom and autogrip device, with nylon rope 22m long for
lift 2.5m lift. Mass of unit 0.7 Kg.
All
System :
" Sales
Code PMCH122"
Almost
every kind of pulley experiment can be demonstrated with
the help of this equipment. It is very much interesting and
of educational value to students, comprising of wooden polished
base of 100 x 20 cm size with two metal supports, and a horizontal
bar having eight adjustable collars with hooks from which
pulleys can be suspended. The following accessories are provided
with the unit. Single pulley with hooks 7, Pulley Triple
long 2, Pulley Triple parallel 2, Wheel and axle 1, Capstan
1, Slotted weights hanger 50 gm 7, 10 gm 3, 20 gm 3, 50 gm
2, 100 gm 7, 200 gm 4.
------------------------------------------ Rod
Type :
" Sales
Code PMCH123"
Aluminium
pulley 38 mm diameter, mounted on light alloy rod 10 mm diameter,
150 mm long.
------------------------------------------
Board
Mounting :
" Sales
Code PMCH124"
Aluminium
pulley, 22 mm diameter, in metal bracket with mounting plate
35 mm long, with fixing holes.
------------------------------------------
Aluminium,
Plain Bearing :
" Sales
Code PMCH125"
Comprising a 70 mm diameter pulley with a wide groove for whipcord, mounted in
an iron frame designed for clamping to the edge of a bench with the pulley in
a vertical plane. The clamp will accept bench tops of upto 25 mm thickness.
------------------------------------------
|
|
Screw
Jack :
" Sales
Code PMCH126"
For demonstrating the efficiency and coefficient of friction. Grooved light
alloy platform, 17.5 cms diameter; screw with 12 mm pitch square thread; cast
iron base with arm and clamp for holding pulley on stem at any height. With
scale pan 15 cms diameter and 2 meter cord.
Train
of Gear Wheels :
" Sales
Code PMCH127"
For demonstrating the relationship between velocity ratio and number of teeth.
Three gear wheels, approximately 60, 80, 110 pitch diameter, with 12, 18, 24
teeth respectively, each mounted on wooden board provided with grooves for
adjusting gear wheels by changing belt.
Overall dimensions approximately 240 x 260 x 300 mm.
Double
Cone on Ramp :
" Sales
Code PMCH128"
The inclined plane consist of two tapered slats conversing at their lower ends.
When the double ended cone roller is placed on the plane, it rolls towards
the high end. Thus the centre of mass of the roller is lowered as the roller
moves "up" the slope made of hardwood polished.
Dimensions : 700 x 40 x 70 mm.
Projectile Apparatus :
" Sales
Code PMCH129"
To illustrate that a body impelled horizontally will fall vertically at the
same rate as a similar body allowed to fall freely. Comprises spring loaded,
L section launcher with holes for locating two 19 mm dia steel balls which
act as projectiles. Launcher is released by push button and projects one ball
forward which allows the other to fall freely mounted on wooden block, 180
x 60 x 30 mm with storage pocket for balls. Complete with 2 steel balls.
Collision
in Two Dimensional Kit :
" Sales
Code PMCH130"
Curved ramps 260 x 325 mm. Length x radius with metal ball track, fitted to
base 140 x 90 mm length x width, one adjustable ball supports, one clamp to
fit slot on base of ramp. One plumb line assembly and 2 steel ball 12 mm dia
------------------------------------------
|
|
SPRING BALANCES
Metric
:
" Sales
Code PMCH131"
Flat
form with hook and brass lacquered scale, after Salter design.
Most accurate.
| Type |
A |
B |
C |
D |
E |
F |
G |
| Cap.
(gms) |
100 |
200 |
500 |
1000 |
2000 |
5000 |
10000 |
| Sub
Divided |
1 |
2 |
5 |
10 |
20 |
50 |
100 |
Newton
:
" Sales
Code PMCH132"
Flat form with hook and brass
lacquered scale, after Salter design. Most accurate.
| Type |
A |
B |
C |
D |
E |
F |
G |
| Cap.
(gms) |
100 |
200 |
500 |
1000 |
2000 |
5000 |
10000 |
Tubular
Metric :
" Sales
Code PMCH133"
Metal tube with hook.
| Type |
A |
B |
C |
D |
E |
| Cap.
(gms) |
100 |
200 |
500 |
1000 |
2000 |
| Sub
Divided |
1 |
2 |
5 |
10 |
20 |
Tubular
Newton :
" Sales
Code PMCH134"
Metal tube with hook.
| Type |
A |
B |
C |
D |
E |
| Cap.
(gms) |
100 |
200 |
500 |
1000 |
2000 |
Metric/Newton
(Combined) :
" Sales
Code PMCH135"
| Type |
A |
B |
C |
D |
E |
| Capacity |
102/1N |
255/1.5N |
510/5N |
1020/10N |
2040/20N |
Dial
Type :
" Sales
Code PMCH136"
A heavy aluminium alloy
stoe enamelled body, with white dial, 152 mm dia, clearly calibrated
in black; knurled zero adjusting knob; strong plated steel hanger
and load hook.
| Type |
A |
B |
C |
D |
| Capacity |
0-10Kg
x 50gm |
0.20Kg
x 100gm |
0-40Kg
x 200gm |
100Kg
x 500gm |
Compression
Balance :
" Sales
Code PMCH137"
Plastic case, slopping front, detachable
rigid plastic load pan, krumbbled zero adjusting control.
| Type |
A |
B |
C |
D |
| Capacity |
1Kg
x 5gm |
2Kg
x 10gm |
5Kg
x 25gm |
10Kg
x 50gm |
Compression
:
" Sales
Code PMCH138"
With enamelled metal
body - circular enamelled dial 175 mm diameter
approx.; tinned pan 230 mm diameter approx.; zero adjuster.
Graduation
Kg.
| Type |
A |
B |
| Capacity |
0
to 5 x 20 gm |
0
to 10 x 50 gm |
------------------------------------------
Hydrostatic
Balance
" Sales
Code PMCH139"
For Determining Specific Gravity By Archimedes Principle. With One Pair Of
Long Frames And One Short Frame With A Hook Inderneath For Specific Gravity
Experiments. With Three Pans ,Adjustablestand And Scale. Mounted On A Wooden
Base.
------------------------------------------
Inertia Balance
" Sales
Code PMCH140"
For Investigating The Nature Of Mass And The Distinction Between Mass And Weight.
Two Metal
Trays 130 X 55 X 23 Mm Are Joined Together With Two Spring Steel Strips Of
10 Mm Width , The Distance Between The Trays Being 215 Mm . One Tray Is Drilled
To Accept 3 Equal Cylindrical Masses. The Other Tray Can Be Clamped To A Bench
Horizontally Or Vertically. Complete With 3 Masses And A G-Clamp.
------------------------------------------
|
|
Friction Apparatus (Inclined Plain)
" Sales
Code PMCH141"
For Experiments On Sliding Friction , Comprises Inclined Wood Plane 600
X 100 X 20 Mm ,With 22 Mm Diameter Pulley , Hinged To Wood Base 450 X
100 X 20 Mm With One Each Wood Blocks ,200 X 75 Mm And 100 X 75 Mm,Steel
Block 100 X 75 Mm. Scale Pan 75 Mm Diameter ,Cord And Hooks .
------------------------------------------
Falling Bodies Apparatus
" Sales
Code PMCH142"
To Demonstrate That A Body Impelled Horizontally Will Have Vertical Acceleration
Same As That Of A Body Falling Freely. Two 19mm Dia Steel Balls Are Launched
By Releasing A Push Button .This Projects One Ball Forward And The Other
Falls Freely.This Mechanism Is Mounted On A Wooden Block ( 180 X 60 X
30 Mm ).
------------------------------------------
' G ' By Free Fall Apparatus
" Sales
Code PMCH143"
This Apparatus Consists Of A Solenoid ( For Prompt Release Of The Sphere
On Being Disconnected ) And Gate Switch Unit Mounted On A Base Which
Is Clamped On A 12 Mm Diameter Retort Stand Rod.Connections Are Made
Through 4 Mm Sockets ,The Gate Switch Unit Consists Of A Hinged Metal
Plate Held Against An Adjustable Contact By Means Of Small Permanent
Magnet So That By Proper Adjustment The Plate Falls Promptly At The Impact
Of The Falling Sphere.Centi Second Timer Can Be Used With This Apparatus.
------------------------------------------
Centi-Second Timer
" Sales
Code PMCH144"
Mains Operated Electronic Timer Reads 0 To 99.99 Seconds.The Display
Comprises Of Four 7 Segment Digits To Read Seconds And Centi Seconds.Two
Pairs Of 4 Mm Sockets Colour Yellow (Start ) Black (Stop ) With Two Push
Button Switches Are Controlled With A Mode Switch Which Enable Either
Make Or Break Pulses To Be Used To Operate The Timer.
Power Supply : 2v / 0.5 A With Reset .
Centi-second
Timer , Digital
" Sales
Code PMCH145"
Mains Operated Electronic Timer Reads 0 To 99.99 Seconds. The Display
Comprises Of Four 7 Segment Digits To Read Seconds And Centiseconds.
Two Pairs Of Colour Coded 4 Mm Sockets With Push Buttons Are Controlld
With A Mode Switch Which Enables Either Make Or Break Pulse To Be Used
To Operate The Timer. With Re-Set Action.
------------------------------------------
Free Fall Tube ( Guinea And Feather )
" Sales
Code PMCH146"
Hard Glass Tube 610 X 48 Mm ,With Two Ruber Bungs ,One Carring Brass
Tube And 380 Mm Rubber Tubing For Evacuation By A Vacuum Pump .
------------------------------------------
Pendulum Bobs , Lead , Brass
" Sales
Code PMCH147"
Comprising ,Sphere With Small Hook For Suspension
Available In Size : 13 , 19 & 25 Mm Diameter .
------------------------------------------
Scale Pans
" Sales
Code PMCH148"
Light Alloy With Cords And Hook.
Scale Diameter : 75 Mm With Cords And Hooks
........................: 100 Mm With Chains And Rings .
------------------------------------------
Dynamics
Trolleys
" Sales
Code PMCH149"
A Pair Of Identical Wooden Trolleys ( 300 Mm Long ) Mounted On Three Wheels.
A Spring Loaded Rod Is Fitted To Give Impulse When Released. It Has A Provision
For Stacking The Trolleys On Top Of Each Other With Removable Pins.Complete With
3 Elastic Cords , 3 Springs , 8 Pins ( For Stacking ), 2 Rubber Corks , 2 Needles & 1
Releasing Pin.A Wooden Track 2 Meter Long Collapsable .The Track Provides An
Easily Inclinable Smooth Surface .
------------------------------------------
Fletcher's Trolley
" Sales
Code PMCH150"
Used For Performing Experiments On Velocity , Acceleration Etc, The Track
1720 X 150 Mm ,Is Fitted With Levelling Feet, Foam Covered Stops At Both
Ends.And Aluminium Pulley 50 Mm Diameter.,An Arrangement To Release Trolley
And Spring Steel Vibrator With Mark At 5hz And 8 Hz Is Provided ,With
Accurately Balanced Wheels Running In Self Contained Support Brackets
5 Calibrated Weights , 2 Brushes , 200 Paper Strips , Ink , 50 Meters
Of Cord And 3 Wooden Blocks .
------------------------------------------
Compound Pendulum, Reversible
" Sales
Code PMCH151"
Comprises Of A Steel Bar , 1 Meter Long Drilled At 50 Mm Intervals ,
Removable Knife Edges And A Support Bracket For Mounting On Walls.
Compound Pendulum , Kater's Reversible
" Sales
Code PMCH152"
Comprises Of A Brass Rod 120 Cm Long 10 Mm Dia, One Pair Each Of Small
And Large Adjustable Brass And Wooden Masses , Two Steel Knife Edges
Set In Adjustable Metal Holder And A Metal Support Bracket For Mounting
On Walls.
------------------------------------------
Universal Force Table
" Sales
Code PMCH153"
To Demonstrate , Triangle , Parallelogram And Polygon Laws Of Forces.The
Disc Is Made Of Aluminium 40 Cm Dia Graduated In Degrees Provided With
4 Pulleys Having Index Mark.Heavy Cast Iron Base With Levelling Screws
Is Provided .Supplied Complete With 4 Sets Of Slotted Weights 500 Gm
.
------------------------------------------
Watt's Governor
" Sales
Code PMCH154"
When The Governor Is Rotated Faster And Faster , The Balls Are Thrown
Out By Centrifugal Force In An Ever Widening Circle.The Jointed Arms
Above And Below Being Brought Closer And Closer Together As In Watts
Steam Engine.This Illustrates The Flattening Of Planets At The Equator
Owing To Their Rotation. Watt Governor Is Rotated With Help Of A Whirling
Table.
------------------------------------------
Whirling Table
" Sales
Code PMCH155"
It Can Be Used In Vertical Or Horizontal Position . It Is Fitted With
Hand Wheel , Belt Driven Pulley And Adapter For Mounting Newton's Colour
Disc , Watt's Governor , Savart's Toothed Wheel , Seebeck's Paratuses
Which Need To Be Rotated.
------------------------------------------
Collision In Two Dimensions
" Sales
Code PMCH156"
To Demonstrate The Principle Of Conversion Of Momentum And Show That
Momentum Has Direction As Well As Magnitude. Consists Of A Curved Wooden
Runway 280 X 76 Mm Length X Height With An 8 Mm Groove,An Index Mark
Near Top And A Slotted Metal Plate At Bottom. A Device Can Be Attached
To The Plate To Provide Support To The Object Sphere Either Exactly Opposite
The Runway Or At Sightly Oblique Position. A Plumb Bob And 2 Steel Balls
Are Provided. The Apparatus Can Be Fixed To The Table With A G- Clamp
( Which Is Not Provided )
------------------------------------------
|
|
Lever Kit
" Sales
Code PMCH157"
To Provide A Simple 'See-Saw' For Experiments On Balancing Masses ,Leading
To The Principle Of The Lever. Comprises Five Wood Beams Approximately
610 X 44 Mm Graduated At 38 Mm Intervals, Four
U-Shaped Supports , Grooved To Locate Fulcrum Pins , 40 Brass Penny-Weights
25 X 25 X 2 Mm And 20 Fulcrum Pins.
------------------------------------------
Hard Wood Lever & S-Hooks
" Sales
Code PMCH158"
One Meter Long Rule ,One Side Divided In Centimeters And Millimeters
And Other Side In Inches And Tenths . Drilled Every 100 Mm With
S-Hooks.
-
S- Hooks
" Sales
Code PMCH159"
For Attaching To Cords For Lifting Of Various Items.
------------------------------------------
Simple Wheel And Axle
" Sales
Code PMCH160"
Comprises Two Grooved Hard Wood Wheels 150 X 75 Mm Diameter Respectively
With Metal Mounting Pin.
Compound Wheel And Axle
" Sales
Code PMCH161"
With Aluminium Alloy Block Comprising Wheel ,100 Mm Diameter And Axles
50 Mm And 25 Mm Diameter,Mounted On Adjustable Steel Cones In Steel Frame,Mounted
On Wooden Board With Four Holes For Wall Mounting,Complete With 5 Meters
Nylon Cord And Steel Hook .
------------------------------------------
Metal Fly Wheel
" Sales
Code PMCH162"
Approximately 200 Mm Dia By 44 Mm Wide Wheel, Mounted On A Balanced Horizontal
Shaft In Metal Bracket ,With Four Holes For Wall Mounting.
------------------------------------------
Linear Air Track
" Sales
Code PMCH163"
Triangular Section Alloy Track,Length 255 Cm ,With Staggered Air Holes
.Supported On Two Light Alloy Castings Positioned 45 Cm From Each End
Of The Track.One Support Has A Two Point Contact And Other A One Point
Contact For Lateral And Horizontal Adjustments For Which A Knurled Screw
Is Provided .Large Catapult Arms With Slots For Elastic Bands Are Fitted
To Each End Of The Track.A Pulley Fitted To One End Of The Track Enables
Experiments Involving Acceleration Under A Constant Force To Be Investigated.Identical
End Caps Enable Air To Be Introduced From Either End Of The Track,Bung
Being Supplied To Close The End Not Being Used. The Vehicles Buffer Attachments
And Clamping Screws Are Matt Black To Help Interpretation Of Stroboscopic
Photographs.
Linear Air Track Accessories Kit
" Sales
Code PMCH164"
Supplied Complete With , 2 Large Vehicles
( Mass 400 Gm, Length 215 Mm )
Qty Items
1 Small Vehicle ( Mass 200 Gm , Length 100 Mm )
2 Magnetic Buffers ( 25 Mm Dia )
2 Plasticine Holders ( 20 Mm Dia ) With Central Hole.
4 Catapults ( 45 Mm Wide ) With Slot For Elastic Band.
3 Steel Buffers With Central Hole.
4 Elastic Cords ( 220 Mm Long ) With Plastic Rings.
1 Reel Of Nylon Thread .
2 White Plastic Rods ( 4 Mm Dia 150 Mm Long ) For Stroboscopic Photography
24 Needles For Use With Steel Buffer .
20 White Plain Cards For Interrupting Light Beams.
1 Reel Rubber Strand
1 Pack Of Plasticine
20 Elastic Bands
1 Instruction Manual.
The Kit Enables The Air Track To Be Used To Its Full Potential, Providing
Most Of The Necessary Equipment To Perform The Experiments Detailed In
The Comprehensive Instruction Manual
------------------------------------------
Air Blower
" Sales
Code PMCH165"
Suitable For Use With Linear Air Track ,With A Flexible Hose Terminating
In A Tapered Adaptor.
Power Supply 230 V, Ac 50hz.
------------------------------------------
Foot Pump
" Sales
Code PMCH166"
A Very Convient Air Pump Used In Laboratory For Various Applications.
------------------------------------------
Photo Timing Gate
" Sales
Code PMCH167"
Used As A Light Operated Timing Gate ,It Consists Of A Photo Detector
And Light Source ( 2.5 V , 0.2 A Bulb ) Housed In Two Plastic Cases Held
40 Mm A Part On A Metal Rod ,4 Mm Socket Are Provided For Connecting
It To The Electronic Timer.
Power Supply :- 2 V/ Ac.
------------------------------------------
|
|
Ticker
Tape Timer A.C.
" Sales
Code PMCH168"
Operates On 12v Ac .The Timer Employs Electromagnet With Spring Loaded Armature
Which Vibrates Above A Support Table For A Carbon Paper Disc, Paper Tape,Drawn
Through Guides On The Table ,Is Struck By A Dotting Screw Carried On The Armature
.The Peg On The Support Table Is Movable To Allow Maximum Use Of Carbon Paper
Disc. Supplied With 90 Meter Roll Of Tape And Carbon Paper Discs. The Ticker
Tape Timer Produces Dots Spaced At 1/50 Or 1/60 Sec Intervals Depending On
Main Frequency .Additional Bonus With Extra Guides
Accomodates 4.5 Mm External Diameter Rubber Tubing For The
' Pearls In Air ' Water Drop Experiment.
Power Supply 12 V/ Ac .
Ticker Tape Timer D.C.
" Sales
Code PMCH169"
The Dots Are Spaced At 1/50 Sec .Power Supply 12v / D.C. Spares : Ticker Tape
,Width 9.5 Mm In Rolls , 300 M Long
Carbon Discs , Pack Of 100
------------------------------------------
|
|
Stroboscope , Manual & Digital
" Sales
Code PMCH170"
A High Quality Stroboscope To Cover The Requirements Of Various
Levels Of Study , Features High Accuracy With Manual And
Digital Readouts.Specially Designed
, Compact & Enchased In Plastic Case.
Technical
Specifications :
Description
Model. Bsm-2000, Manual Model. Bsd-2001, Digital
Voltage : 220v,50hz 220v,50hz
Flash Tube : Xenon Long Life Steckbar Xenon Long Life Steckbar
Light Intensity : Max 350 Lux Max 350 Lux
Flash Duration : 7 Us 7 Us
Display : By Turning Knob Lcd Display
Frequency Range : 2,5….300hz=150…..18000 1/Min
Range Division : 2,5…66,6hz=150…4000/Min/61,6…300hz-3700…18000/Min
Stroboscope : Digital
" Sales
Code PMCH171"
Used Wherever Motion Sequences Have To Be Analysed Or Rotation
Speeds Have To Be Measured .Separate Control Unit And Hand
Held Lamp.Suitable For Continious
Operation.Bright Light Intensity Makes Measuring Possible Also By Day Light,Voltage & Frequency
Out Put, External Tiggering Via Photo Emitter Inductive Sensor Or External
Tiggering Signal For Observation Of Irregular Motion Sequences , Measuring
Of Rotation Speed , Frequency And Period Length Direct Reading In The Required
Unit,No Conversation Necessary.
Technical Specifications:
Operating
Voltage : 220c Ac ,50hz
Range : 20000 Rpm
Flashing Frequency : 330 Hz
Period : 3-300 Ms
Type Of Tube : Xenon Tube
Light Intensity : 2400 Lux
Accuracy : +/- 1 Digit
Indication And Measuring Ranges : Rpm - 200-20000
Hz - 3-33-Hz
Ms - 3-300 Ms
Internal Triggering : Range 1 - 200 - 4000 Rpm
Range 2 - 1000 - 20000
External Triggering : Synchronous With Mains Optical Emitter With Switch -Over
To Bright Or Dark Markings, Inductive Emitter With Switchover To Gear Wheel
Or Aperture Disk. Logical Signal , Alternating Current
Out Puts-Frequency : Logic Signal 15 V / 40 Ma
Voltage : 30mv / Hz , Linearity 5%
Stroboscope , Hand
" Sales
Code PMCH172"
Matt Black Finish,250mm Dia,With 12 Radial Slots Extending To Its Edge And
Finger Hole . Rotates On Handle.
|
|
| |
|
|
PHYSICS
NAUGRA EXPORT : Scientific Equipment and Supplies, Manufacturer & exporter
, scientific instrument, Laboratory Glassware, Microscope, Physics,
Physics instruments, Physics apparatus, Physics Equipments, Physics
Magnetics E-mail
: sales@naugraexport.com
Naugra
Export manufactures and ships Scientific Equipments cum Instruments
from it's location in Ambala-India
6148/6,
Guru Nanak Marg, Ambala Cantt, Haryana, India. Call: 91-0171-2643080/5006677 Fax:
91-0171-2601773.
E-mail
: sales@naugraexport.com Naugra
Scientific World ! - Naugra Export Copyright© Naugra Export |
|
