Ripple Tank
" Sales
Code PWAV101"
The Ripple Tank Consists Of A Metal Tray With A Transparent Base And Detachable
Legs,Overall Size Of Tray 380 X 380 X 45 Mm Deep .
A Inverse ' U ' Shaped Bracket Is Provided Which Can Be Attached To The
Sides Of The Tank And Used To Carry The Wave Generating System . A Set
Of 4 Metal Reflectors Consisting Of A Pair Of Straight Reflectors ( Barriers
) 150 X 25 Mm , A Curved Reflector Of 160 Mm Chord Length X 25 Mm High
And A Short Straight Reflector 25 X 25 Mm. A Set Of 4 Loose Gauge Strips
Are Provided For Reduction Of Unwanted Reflections From The Sides Of The
Tank.The Ripples Are Produced By A Small 1.5 Volts D.C. Electric Motor
Operates On 1.5 V Cell Mounted At The Centre Of A 200 Mm Wave Generator
Bar With A Row Of Holes To Mount The Spherical Dipper. Illuminant Operates
On 220 V -60 Watt.
Also Available With In-Built Power Supply.Input 220v 50hz Out Put 1.5
Volt To 3 Volt D.C. For Running Rippler Motor And 12v ,21w For Operating
Illuminant .
Ripple Tank
" Sales
Code PWAV102"
To Demonstrate The Laws Which Govern All Wave Phenomenon Using Ripples
On The Surface Of Water As The Prototypes Of All Transverse Waves.Ripple
Tank Illustrates Important Wave Motions Like Rectilinear And Circular.It
Can Also Demonstrate Refraction, Diffraction And Interference Of Water
Waves.Tank Is 595 X 510 X 70 Mm Supplied Complete With Rippler Assembly,Two
Straight Obstacle 130 Mm Long ,One Straight Obstacles 40 Mm Long Curved
Reflector 200 Mm Radius, Transparent Refraction Plate,Wooden Wave Roller,One
Pack Of Rubber Bands, Water Dropper , Sponge, Illuminator, Hand Stroboscope
And Suitable Power Supply .With Instruction Manual .
Tuning Fork
" Sales
Code PWAV103"
Blue Steel , Plain Shank, Set Of 8 With Frequency Marked .
Note Frequency, Hz Note Frequency, Hz
C 256 G 384
D 288 A 426
E 320 B 480
F 341 C 512
Tuning Fork On Resonance Box
" Sales
Code PWAV104"
To Demonstrate The Production Of Beat Tones ,Comprises Of 4 Tuning Forks
Of Different Frequencies Mounted On A Wooden Resonance Box With Hammer.
Stethoscope
" Sales
Code PWAV105"
A High Quality, Professional Pattern .
Beats Apparatus
" Sales
Code PWAV106"
Pair Of Tuning Forks Frequencies A 426.6 Hz, Mounted On Individual Resonance
Boxes.One Fork Fitted With Sliding Mass ,With Hammer.
Bell In Vacuum
" Sales
Code PWAV107"
An Electric Bell Working On 2.4 Volt D.C. Suspended In Bell Jar With
Connections To Terminals Mounted On Rubber Bung Sealing The Jar. For
Use On Pump Plate Not Less Than 150 Mm .
Wave Form , Helix
" Sales
Code PWAV108"
For Experiments In Wave Motion,Pulses ,Reflection And Interference. Steel
Wire Close Wounded Helix, 19 Mm Dia, Closed Length 3 Mm Extending To
9 Mm Approximately.
Wave Form Helix , Slinky
" Sales
Code PWAV109"
For Demonstrating Wave Motion, Helical Coil Of Flat Section Tempered
Steel Wire Coil Dia 78 Mm,Closed Length 120 Mm Full Extended To 5 Meters
.
Powell's Wave Machine
" Sales
Code PWAV110"
For Demonstrating The Movement Of Progressive Transverse Waves, Comprises
22 Small Balls Fitted On Wire Rods,With Eccentric Motion Attachment And
Driving Handle.Fitted On Base .
Wave Apparatus Demonstration Model
" Sales
Code PWAV111"
To Demonstrate Longitudinal And Transverse Motions,Comprises Of A Number
Of Eccentric Discs Supporting A Series Of Metal Rods.On Revolving The
Handle, Transverse Waves Are Obtained. Longitudinal Waves Are Obtained
With Bent Rods Running In A Metal Guide .
Sound
Resonance Apparatus Simple
" Sales
Code PSOU101"
It Consists Of Two Aluminium Tubes Sliding In Each Other For Measuring
The Resonant Length Of An Air Column Set Up By A Vibrating Tuning Fork.
The Length Of The Air Column Can Be Varied From 30 To 53 Cm.
Resonance Apparatus
" Sales
Code PSOU102"
It Consists Of A Glass Tube 100 Cm Long , Mounted On A Stand Which Is
Fitted With Levelling Screws. The Lower End Of The Tube Is Connected
To A Hard Glass Reservoir By Rubber Tubing Provided With A Pinch Cock.
The Reservoir Slides On A Metal Rod And Can Be Raised Or Lowered For
Adjusting The Length Of Coloum Of Air. It Is Used To Measure The Velocity
Of Sound Waves In Air At Room Temperature By Using A Tuning Fork.
Organ Pipe
" Sales
Code PSOU103"
It Consists Of A Wooden Pipe And A Graduated Sliding Rod, 700 Mm Long
When Fully Extended. As The Air Column In The Pipe Vibrates , A Musical
Sound Is Produced.
Savart's Toothed Wheel
" Sales
Code PSOU104"
It Consists Of A Set Of 4 Toothed Wheels ( 75 Mm Dia ) Mounted On A Spindle
And A Pack Of Six Cards. Ratio Of Teeth Is 4:5:6:8 . It Is Used With
Whirling Table. As A Card Is Held Against The Teeth Of A Ratating Disc
And The Speed Is Slow , A Different Sound Is Heard As The Card Passes
Each Tooth. When The Speed Is Increased , The Taps Are Heard Closer And
Give A Musical Note.
Whirling Table
" Sales
Code PSOU105"
It Can Be Used In Vertical Or Horizontal Position . It Is Fitted With
Hand Wheel , Belt Driven Pulley And Adapter For Mounting Newton's Colour
Disc , Watt's Governor , Savart's Toothed Wheel , Seebeck's Paratuses
Which Need To Be Rotated.
Seebeck's Siren Disc
" Sales
Code PSOU106"
It Consists Of A Disc Having Four Rows Of Holes Arranged In A Circle,Near
The Circumference, All Equally Distant From One-Another And A Blow Pipe
To Bpow Air On The Holes ( To Get A Clear Musical Note ). It Is Fitted
With A Spindle To Attach It With The Whirling Table.
Siren With Indicator
" Sales
Code PSOU107"
It Consists Of A Hollow Wooden Box With , 3 Wires , Sliding Bridges ,
Adjustable Pulley And Keys Mounted On Legs.It Is Used To Study Various
Notes Od Sound Produced By Stringed Instruments.
Microphone :
" Sales
Code PSOU108"
General Purpose Piezzo-Electric Crystal Microphone,Frequency Response
60 To 10000 Hz. Complete With Screened Lead ,Terminals And Jack Plug.
Loud Speaker
" Sales
Code PSOU109"
4 Ohm Moving Coil Speaker ,Mounted In Frame For Vertical Or Horizontal
Position , With Two 4 Mm Sockets.
|