Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Diesel Vehicle (Running condition)....
Product Code: NSL0013 - (Diesel Vehicle (Running condition))
Equipment for Education, Engineering and Vocational Training - Different Thermocouple for Temperature Measurements Trainer Different Thermocouple for Temperature Measurements Trainer....
Product Code: ETKN-0224 - (Different Thermocouple for Temperature Measurements Trainer for Vocational Training and Didactic Labs)
Differential & rear axle Trainerfor engineering schools, technical teaching equipment for engineering
The differential is a special gear box located between the drive wheels
of your vehicle. It allows the drive wheels to turn at different speeds,
as they must when turning a corner. Over time, high operating
temperatures can cause the lubricating fluid in the differential to
break down, developing a gummy texture that doesn't properly lubricate
the gears. Replacing the fluid can help you avoid premature wear on the
gears in the differential, and can even help reduce wear on drive-wheel
tires.....
Equipment for Education, Engineering and Vocational Training - Differential Amplifier Trainer Differential Amplifier Trainer....
Product Code: ETKN-0225 - (Differential Amplifier Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Differential Amplifiers Trainer Differential Amplifiers Trainer....
Product Code: ETKN-0226 - (Differential Amplifiers Trainer for Vocational Training and Didactic Labs)
Differential Gear Assembly - Actual Cut Section
.... Product Code: TechnicalLab0162 - (Differential Gear Assembly - Actual Cut Section)
Differential Gear Assembly Automobile Engineering Model and Training System, technical teaching equipment for engineering....
Product Code: NEAUTOM31 - (Differential Gear Assembly Automobile Engineering Model and Training System for engineering schools)Differential Gear Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG022 - (Differential Gear Engineering Training Model for engineering schools)Differential Model
This product is a model of a differential. This model permits the instructor and student to manually turn the handle and apply a load to the transparent wheels to demonstrate the differential mechanism.
In automotive mechanics, the differential gear arrangement permits power from the engine to be transmitted to a pair of driving wheels, which divides the force equally between them and permits them to follow paths of different lengths, as when turning a corner or crossing an uneven road. On a straight road, the wheels rotate at the same speed. When turning a corner, the outside wheel has farther to go and will turn faster than the inner wheel if unrestrained.
Removal of the Gear Assembly:
The instructor can remove the gear assembly from the main body to highlight details and it sits comfortably on a table.....
Equipment for Education, Engineering and Vocational Training - Experimental Training Board has been designed specifically to study Differential Phase Shift Keying (DPSK) Modulation and Demodulation. ....
Product Code: ETKN-0008 - (Differential Phase Shift Keying Modulation And Demodulation Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Differential Phase Shift Keying Modulation Trainer Differential Phase Shift Keying Modulation Trainer....
Product Code: ETKN-0227 - (Differential Phase Shift Keying Modulation Trainer for Vocational Training and Didactic Labs)Trainer.jpg "Differential Pulse Code Modulation (DPCM) Trainer for Communication Teaching Labs")
Differential Pulse Code Modulation (DPCM) Trainer -....
Product Code: COM-TR-26 - (Differential Pulse Code Modulation (DPCM) Trainer for Communication Teaching Labs)
Equipment for Education, Engineering and Vocational Training - Differential Pulse Code Modulation Trainer Differential Pulse Code Modulation Trainer....
Product Code: ETKN-0228 - (Differential Pulse Code Modulation Trainer for Vocational Training and Didactic Labs)
Differential unit with axle....
Product Code: NSL0084 - (Differential unit with axle)
Differential unit with axle ( Cut model )....
Product Code: NSL0077 - (Differential unit with axle ( Cut model ))
Differential Voltage Sensor....
Product Code: DataNAS-10008 - (Differential Voltage Sensor)
Diffraction Gratings Educational for Physics Lab India
.... Product Code: PLIT-0003 - (Diffraction Gratings Educational for Physics Lab)
Diffraction Gratings for Physics Lab India
.... Product Code: PLIT-0002 - (Diffraction Gratings for Physics Lab)
for Gas Chromatography - Diffusible Hydrogen Analyzers provides analysis of diffusible hydrogen in weld seams,
steel samples as per ISO 3690 norms and AWS A 4.3 norms.
The Diffusible Hydrogen Analyzers is designed using N carrier gas. With
this analyzer diffusible hydrogen content of solid materials can be
analyzed quickly and accurately.
....
Equipment for Education, Engineering and Vocational Training - Digital Analog Lab Trainer Digital Analog Lab Trainer....
Product Code: ETKN-0229 - (Digital Analog Lab Trainer for Vocational Training and Didactic Labs)
Digital And Analog Communication Trainer....
Product Code: Workshop Lab - ICW0001 - (Digital And Analog Communication Trainer)
Digital Blood Cell Counter
.... Product Code: HMEDLAB-PATH-10002 - (Digital Blood Cell Counter)
Digital Bomb Calorimeter....
Product Code: TEL0012 - (Digital Bomb Calorimeter)
Digital BP Cuff Small (22-32 CM)
.... Product Code: HMEDLAB-HEALTH-10004 - (Digital BP Cuff Small (22-32 CM))
Digital Caliper with Absolute Encoder India
....
Equipment for Education, Engineering and Vocational Training - Digital Capacitance Meter Trainer Digital Capacitance Meter Trainer....
Product Code: ETKN-0230 - (Digital Capacitance Meter Trainer for Vocational Training and Didactic Labs)
Digital CBR Test Machine We are Leading Supplier of Digital CBR Test Machine in India. We also bulk supply Digital CBR Test Machine for laboratory tensers. Description: The CBR machine features a rigid two-column frame with upper cross-beam, which can be adjusted in height and locked in position with locknuts. The driven force is provided by a linkage of motor, worm and worm wheel housed in the base cabinet, which also accommodates the motor and the electric panel. It can be […] ....
Product Code: Civil Engineering0001 - (Digital CBR Test Machine)
Digital CBR Test Machine We are Leading Supplier of Digital CBR Test Machine in India. We also bulk supply Digital CBR Test Machine for laboratory tensers. Description: The CBR machine features a rigid two-column frame with upper cross-beam, which can be adjusted in height and locked in position with locknuts. The driven force is provided by a linkage of motor, worm and worm wheel housed in the base cabinet, which also accommodates the motor and the electric panel. It can be operated by both motor and manual handle. Technical Specifications : load : 30 KN capacity Test speed : 1mm/min or 27 mm/min Size of penetration rod : Dia. 50 x 50 mm CBR Mould and accessories : 1 x Mould ( diameter 152 mm and height 177.8 mm ) 1 x Dial gauge ( 10 x 0.1 mm ) 1 x Tripod 1 x Spacer Disc with T 1 x Swell Plate ( 1.1 kg ) 8 x Split surcharge weights ( total weight 9.08 kg ) ....
Product Code: Civil Engineering0016 - (Digital CBR Test Machine)
Digital Circuits Development Platform - Digital Circuits Development Platform -TechBooks are compact and user
friendly learning platforms to provide a modern, portable, comprehensive
and practical way to learn Technology. Each TechBook is provided with
detailed Multimedia learning material which covers basic theory, step by
step procedure to conduct the experiment and other useful information.
Scientech 2611 Digital Circuits Development Platform is used to perform
digital circuit experiments. It is very useful in Digital Circuits
Development Platformoratories for performing digital experiments in
colleges and universities. It is also useful in testing circuits and
making projects related to digital electronics.
Digital Circuits Development Platform comprises of following blocks:
DC Power Supply
Pulse Generator
Pulser Switches
8 Bits Data Switches
Logic Probe
Digital Display
Mode Selector
8 bits LED Display.
Self contained & easy to operate
Functional blocks indicated on board mimic
Solder less breadboard
On Board DC Power Supply
Onboard pulse generator with TTL/CMOS mode
Pulser switches, 8 bit data switches
Bicolor LED display, logic probe, BCD to seven segment display
CMOS/ TTL output....
Digital Circuits Development Platform - Digital Circuits Development Platform - Digital Circuits Development Platform Features: - Hi Quality Breadboard - Ready to use circuit boards (optional) - On Board DC Power supply - On Board 1 MHz Pulse Generator with TTL/CMOS mode - Pulser switches, 16 bit data switches - Bicolor LED display & Logic probe - BCD to Seven Segment Display - CMOS/TTL outputs - More than 20 designed experiments for bread board - Functional blocks indicated on board mimic - Optional ready to use Circuit boards Learn with Digital Circuits Development Platform: - To study operation of all logic gates - Binary Addition : Half Adder. Full Adder, 2 bit binary Parallel adder - Binary Subtraction - Binary to Gray Code Conversion - Gray Code to Binary Conversion - Binary to Excess-3 Code Conversion - R-S,J-K,T,D,Master-Slave Flip Flops - 4 Bit Up Down Counter - Johnson Counter....
Product Code: BEL-TR-49 - (Digital Circuits Development Platform for Electronics Teaching Labs)
Digital Colony Counter - It is designed for quick and accurate counting of bacterial and mould colonies in petri dishes. Feature packed & easy to use, this is an indispensable bench top tool for the busy microbiologist. It is designed for rapid and accurate counting of bacterial and mould colonies. Simply place the petri dish on the illuminated pad and touch the dish with the pen provided to mark each colony in turn. This causes a count to be registered on the digital display and an audible tone confirms each count made. Marking the dish with the pen avoids missing colonies or double counting. The digital count on the display cab be reset manually any time by pressing the RESET key. Optimum viewing of colonies is aided by peripheral glare-free illumination. An integral magnifying glass provides for easier counting of small colonies. FEATURES : 110 mm Dia Magnifying Glass Audible Confirmation of each Count Uniform Glare Free Illumination Digital Readout Pen Auto Marker Pen....
Product Code: NAAY-M8 - (Digital Colony Counter)Digital Communication....
Product Code: Workshop Lab - SEW0006 - (Digital Communication)
Digital Communication Trainer We are Leading Supplier of Digital Communication Trainer in India. We also bulk supply Digital Communication Trainer for laboratory tensers. Technical Specifications The Communication Trainer Consists Of The Following Modules : Line Code Encoder and Decoder Module : Uipolar and Bipolar NRZ Signal Encoder & Decoder Type of Signal : TTL, Data rate : 1 kbps ~ 4 kbps Unipolar and Bipolar RZ Signal Encoder & Decoder Type of Signal : TTL, Data rate : 1 kbps ~ 2.5 kbps, CLK : 2KHz ~ 5KHz AMI Signal Encoder & Decoder : TTL, Data rate : 50 bps ~ 250 bps, CLK : 100Hz ~ 500Hz Manchester Signal Encoder & Decoder Type of Signal : TTL, Data Rate : 100 bps ~ 400 bps, CLK : 200Hz ~ 800 Hz PWM Modulator and Demodulator Module : uA741 Pulse Width Modulator Carrier signal : 1.5KHz ~ 2KHz, Audio signal : 500 Hz LM555 Pulse Width Modulator Carrier signal : 5KHz ~ 10KHz, Audio Signal : 1 KHz Pulse Width Demodulator : Carrier Signal : 5KHz ~ 6KHz, Audio Signal : 500Hz ~ 700Hz PCM Modulator and Demodulator Module : PCM Modulator & Demodulator Built in Simple Frequency : 8 KHz Built in Operation Frequency : 2048 KHz Delta Modulator and Demodulator Module : Delta Modulator & Demodulator Type of Sample Signal : TTL CLK Sample Frequency : 32KHz ~ 256KHz & Audio Signal : 1KHz ~ 3KHz Adaptive Delta Modulator and Demodulator Module : Adaptive Delta Modulator & Demodulator Type of Sample Signal : TTL CLK Sample Frequency : 32KHz ~ 128KHz & 64KHz ~ 256KHz Audio Signal : 500Hz ~ 1KHz ASK Modulator and Demodulator Module : XR 2206 ASK Modulator Carrier signal : 20KHz, Data Rate : 1 kbps MC 1496 ASK Modulator Carrier Signal : 20KHz ~ 100KHz, Data Rate : 2 kbps Asynchronous ASK Demodulator Carrier Signal : 20KHz, Data Rate : 200bps ~ 1kbps Synchronous ASK Demodulator Carrier signal : 100KHz, Data Rate : 200 bps ~ 2 kbps FSK Modulator and Demodulator Module : XR 2206 & LM566 FSK Modulator & Demodulator Data rate : 200 bps ~ 400 bps PSK Modulator and Demodulator Module : PSK Modulator & Demodulator Carrier Signal : 100KHz, Data Rate : 200 bps Function Generator & DC Power Supply Module : Waveforms : Sine, Triangle, Square, TTL Pulse Amplitude : >10Vpp Impedance : 50Ω±10% Duty Control : 30% ~ 60% Display : 6 Digit LED Display Frequency range : 10Hz to 100KHz (4 ranges), 100Hz to 1MHz (4 ranges) Frequency control : Separative Coarse and Fine tuning Constant voltage output : ±5V, ±12V Variable voltage output : 0V ~ ±15V Power Source : 220 ~ 230 V AC, 50Hz, 1 Phase ....
Product Code: Lab Trainers0016 - (Digital Communication Trainer)
Digital Communication Training System - Digital Communication Training System -compact and user friendly
learning platforms to provide a modern, portable, comprehensive and
practical way to learn Technology. Each TechBook is provided with
detailed Multimedia learning material which covers basic theory, step by
step procedure to conduct the experiment and other useful information.
In most fundamental sense, Digital Communication plays a very important
role in above Communication Technologies and is the basis for any
transmission. Scientech 2137 Digital Communication Training System is an
ideal solution to bridge the gap between theoretical studies and
practical working. Using this training system student will be able to
understand step by step journey of communication system. All major
blocks required in Digital Communication blocks are covered and test
points are provided for each step. Inbuilt Mixed Signal Oscilloscope-MSO
[CH1+ CH2 + LA (8CH)] with 5.7 TFT Graphical LCD gives a freedom of
test & measurement instrument and Data Acquisition Card.
Digital Communication Training System is based on VLSI and DSP platform
In-build internal data generator : 256 Bit
Type of Encoding & Decoding: 1bit, 2bit, 3bit, 4bit
Type of Modulations & Demodulations: ASK, FSK, BPSK, DBPSK, QPSK,
DQPSK, p/4 QPSK, OQPSK, M-ary ASK, M-ary FSK, MSK, 8-PSK, 8-QAM, 16-PSK,
16-QAM
Constellation (Vector) pattern for respective modulation
Large 5.7 Touch Panel TFT Graphical LCD for Graphical user interfaces
In-build Mixed Signal Oscilloscope (2CH Analog + 8CH Digital) for real-time signal analysis
Training System has more than 30 test points which will help students to observe the signal on Oscilloscope and Logic Analyzer
PC to PC interface with interactive messaging software
More than 40 experiments can be performed....
Digital Communication Training System is an ideal solution to bridge the gap between theoretical studies and practical working. Using this training system student will be able to understand step by step journey of communication system. All major blocks required in Digital Communication blocks are covered and test points are provided for each step. Inbuilt Mixed Signal Oscilloscope-MSO [CH1+ CH2 + LA (8CH)] with 5.7 TFT Graphical LCD gives a freedom of test & measurement instrument and Data Acquisition Card. - Digital Communication Training System is based on VLSI and DSP platform - In-build internal data generator : 256 Bit - Type of Encoding & Decoding: 1bit, 2bit, 3bit, 4bit - Type of Modulations & Demodulations: ASK, FSK, BPSK, DBPSK, QPSK, DQPSK, p /4QPSK, OQPSK, M-ary ASK, M-ary FSK, MSK, 8-PSK, 8-QAM, 16-PSK, 16-QAM, - Constellation (Vector) pattern for respective modulation - Large 5.7â?? Touch Panel TFT Graphical LCD for Graphical User interfaces - In-build Mixed Signal Oscilloscope (2CH Analog + 8CH Digital) for real-time signal analysis - Training System has more than 30 test points which will help students to observe the signal on Oscilloscope and Logic Analyzer also - PC to PC interface with interactive messaging software - More than 40 experiments can be performed....
Product Code: VLS-TR-10 - (Digital Communication Training System for VLSI Design Training Systems Teaching Labs)
Digital communications trainer - Digital Communication Trainer should be designed in a modular format using base station and PCB module approach in order to make the program both comprehensive and flexible for both student and the teacher. The base station should provide a working platform for the Digital Communication Modules. All necessary equipment such as power supplies, switches and others services required for operation of the modules should be included on the base station.
Courseware:
A comprehensive experiment manual should be provided to guide the students in studying the various application modules. This manual should include step-by-step instruction to prepare the modules for the experiment as well as some theory to strengthen the student’s knowledge in areas that is important as a background which is needed before doing the experiment. Complete Digital Training System should be provided with all of the topics. The trainer should be able to cover the following topics:
• Analog to digital & digital to analog converter
• Parallel to serial & serial to parallel converter
• ASK modulator & demodulator
• FSK modulator & demodulator
• PSK modulator & demodulator
• QPSK modulator & demodulator
• RZ, NRZ & clock delay
• Word clock
Specification:
1.Base Station:
This is the base station that provided a working platform for the Digital Communications Modules. It contains power supplies, switches and other services required for operation of the modules.
2.Modules:
The modules should feature electrical and electronic components that are mounted onto printed circuit boards with the circuit diagram silk-screened onto the surface. Interconnections between key components or circuit blocks should be provided through 2mm test leads. It includes the training modules, storage case, 2mm test leads and experiment manuals. The modules should be designed to work with the base station which provides common connection that are required for the experiments. Experimental training manual to be provided during bidding process to ensure all experiments are covered.
....
Digital Compression Testing Machine for Concrete Testing - The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design emphasizes simplicity, both of construction and operation, and makes the machine easy to use and maintain. The unit is compact, making its useful for site applications. The digital machines are provided with a pace rate indicator to indicate pace rate on a Bar Graph. With a little experience, the pace rate can be manually adjusted while the test is in progress. The Complete Unit comprises of : Loading Unit : The loading unit is of fully welded construction having a cross head, base and solid plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided complete with ball seating arrangement. Pumping Unit : The two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. The digital read-out unit, incorporates a 4-digit display, calibrated in kN and features integral load pacing in kN/sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 100 complete runs/tests can be stored in the memory.....
Product Code: NCOT-C31 - (Digital Compression Testing Machine For Testing Lab for Concrete Testing Lab)
Digital Conductivity, TDS, Salinity Meters - These meters are reliable and accurate test instruments for measurement of conductivity/TDS/Salinity of Aqueous solutions. They measure conductivity and TDS in five ranges. The resolution is 0.1 µS/cm and 0.1 ppm respectively, in the lowest range. The cell constant is flashed on a digital display from the front panel. The instruments have the \"Check\" facility to calibrate the instrument. These instrument are ideal for monitoring salt content in water ans soluble salts in soils. They are extremely instruments for agriculture and soil analysis labs, swimming pools, fertilizer plants, petroleum refineries, textile plants etc. FEATURES : Highly Stable & Accurate Cell constant adjustment facility 3½ digit display Available in Laboratory & Field Models Automatic Temperature Compensation Facility....
Product Code: NAAY-M15 - (Digital Conductivity, TDS, Salinity Meters)
Built-in D/A and A/D circuit (8-bit) 8085 based uP-kit as digital controller with user software in 8K EPROM. 16-bit arithmetic for algorithm calculations. 16 built-in levels of p. I and D gain each.....
Product Code: I 40 - (Digital Control System Trainer for Instrumentation Electric Labs)
Equipment for Education, Engineering and Vocational Training - Digital DC Microvoltmeter Trainer Digital DC Microvoltmeter Trainer....
Product Code: ETKN-0231 - (Digital DC Microvoltmeter Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Digital Demultiplexer Trainer Digital Demultiplexer Trainer....
Product Code: ETKN-0232 - (Digital Demultiplexer Trainer for Vocational Training and Didactic Labs)
for Soil Testing - Used to determine the resistance to shearing of all types of soil specimens both consolidated and drained, undisturbed or remoulded samples. The machine can accommodate specimens dia. 60, 100 mm, and square 60x60, 100x100 mm. The apparatus is equipped with a control closed loop motor with epicycloid reducers. At the beginning of each test, the machine performs an automatic and complete internal check, a position reset with the elimination of all possible positioning errors and all pauses. The input of all the test patterns is achieved by the interaction of the keyboard and the alphanumeric display with self-memory, thus granting infinitesimal resolutions in short times. All data are input and stored when the machine is in stand-by, without affecting the specimen under test with quick machine setting. Possibility to fix maximum excursion of the shear box, so as to interrupt automatically the test. It is possible to input a different return speed (residual shear) in relation to the one used for the shear test, thus allowing a quick playback to select the residual shear test, saving a lot of time. For determining the direct shear strength of soils on specimen size 60mm x 60mm x 25mm Features : RS 232 output for connection to PC Display of both speed and displacement with 0.00001 mm resolution Shear speed between 0.00001 to 9.99999 mm/minute Max shear effort: 5000 N possible on the whole speed range Possibility of direct vertical load, or with a lever arm ratio 10:1 Max vertical direct load: 500N; with lever arm: 5500N Display and pilot lamps to signal any bad functioning and alarms Box group mounted on ball track with high quality antifriction system Read value results are immediate and of extreme accuracy Extremely easy and practical use, not requiring qualified staff. Shear box, hollow punch and tamper are not included in the standard supply and have to be ordered separately Power supply: 230 V A.C. Single Phase 50Hz....
Product Code: NSOL-T51 - (Digital Direct, Residual, Shear Apparatus For Testing Lab for Soil Testing Lab)
Digital Disperser (Homogenizer) India....
Product Code: NG400 - (Digital Disperser (Homogenizer) India)Digital Drum Heaters Description: Manufacturer & exporter of drum heater - digital.....
Product Code: NLAB-0114 - (Digital Drum Heaters for School Science Lab)
Digital Electronic Balances....
Product Code: NELAB-21-A9005 - (Digital Electronic Balances)
Digital Electronic Trainer
.... Product Code: EWB0001 - (Digital Electronic Trainer)
Equipment for Education, Engineering and Vocational Training - Digital Electronic Trainer Trainer Digital Electronic Trainer Trainer....
Product Code: ETKN-0233 - (Digital Electronic Trainer Trainer for Vocational Training and Didactic Labs)
