Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Emulsion Polymerization Reactor....
Product Code: ChemicalREA-10014 - (Emulsion Polymerization Reactor)
Encoder and Decoder Trainer - Encoder and Decoder Trainer -Encoder and Decoder Trainer has been
designed specifically for the study of 8-to-3 Line Encoder and 3-to-8
Line Decoder. The Training board explains the phenomena which encodes 8
data lines to 3 lines and decodes 3 data lines to 8 lines. The board is
absolutely self contained and requires no other apparatus
+5V SMPS Adaptor provided with the trainer for power supply
Easy illustration of Encoder and Decoder
LEDs for visual indication of inputs and outputs status
SPDT switches for logic selection
Good quality, reliable sockets are provided at appropriate places on board for connections
Strongly supported by systematic operating instructions
A low cost training system....
End Mill Grinding Machine ....
Product Code: End Mill Grinder0001 - (End Mill Grinding Machine)
Equipment for Education, Engineering and Vocational Training - Experimental Training Board has been designed specifically for Determination of Energy Band Gap in Semiconductor (P-N Junction Diode) using Temperature dependent of reverse saturation current.....
Product Code: ETKN-0022 - (Energy Band Gap in Semiconductor Diode for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Energy Band Gap Trainer Energy Band Gap Trainer....
Product Code: ETKN-0294 - (Energy Band Gap Trainer for Vocational Training and Didactic Labs)
Energy Losses in Bends and Fittings
The equipment is mounted on a free-standing framework which supports
the test pipework and instrumentation. The following typical pipe
fittings are incorporated for study: mitre bend, 90º elbow, swept bends
(large and small radius), sudden contraction and sudden enlargement. All
are instrumented with upstream and downstream pressure tappings. These
tappings are connected to a bank of twelve water manometer tubes,
mounted on the framework. Pressurization of the manometers is
facilititated by a hand
pump. A gate valve is used to control the
flow rate. A separate gate valve is instrumented with upstream and
downstream pressure tappings which are connected to a differential gauge
on the edge of the framework. The unit stands on the working top of the
Hydraulics Bench which is also used as the source of water supply.
Experimental Capabilities:
Specifications:
– 450 mitre
– elbow
– short bend
– large bend
– enlargement
– contraction
.... Product Code: NEGEMG139 - (Energy Losses in Bends and Fittings)
Energy Losses in Pipes
The Energy Losses in Pipes accessory consists of a test pipe,
orientated horizontally, which may be fed directly from the Hydraulics
Bench supply or, alternatively, from the integral constant head tank.
This equipment allows the pressure drop of water passing through a
hydraulically smooth circular pipe to be measured in detail and the pipe
friction equation to be verified.
These sources provide high or low
flow rates which may be controlled by a valve at the discharge end of
the test pipe. Head loss between two tapping points in the test pipe is
measured using two manometers, a water over mercury manometer for large
pressure differentials and a pressurized water manometer for small
pressure differentials.
Excess water discharging from the constant
head tank is returned to the sump tank of the Hydraulics Bench.
Adjustable feet permit levelling.
Experimental Capabilities:
Specifications:
.... Product Code: NEGEMG135 - (Energy Losses in Pipes)
Engine Compression Ratio Trainer, technical teaching equipment for engineering
....
3.jpg "Engine model (diesel)")
23.jpg "Engine model (Petro 2stroke)")
Engine model (Petro 2stroke)....
Product Code: NJC0019 - (Engine model (Petro 2stroke))Engine Powered Chainsaw - Manually Operated
This product is a cut-away of an engine powered chainsaw. It is operated manually by a hand crank.
SPECIFICATIONS:
• 2 stroke engine with carburetor
• Centrifugal clutch
• Oil pump for chain lubrication
• Electronic ignition
• Safety system
• Operated manually by hand crank....
Engine Test bed with emission control Trainer, technical teaching equipment for engineering
....
Engineering Equipments & Models
The majority of educational equipment available from Naugra Engineering
focuses on the lab requirements of Engineering Education - Engineering
Training Models - Applied Mechanics, Engineering Models, Object Drawing
Models, Hydraulics & Fluid Mechanics, Construction Machines Models,
Automobile Engineering Models, Heat Engine Lab Models, Civil Engineering
Models, Thermodynamics Lab, Heat Transfer Lab Equipments, Refrigiration
& Air Conditioning, Theory Of Machine Lab, I.C. Engine Lab
Equipments....
Engineering Training Cutaways Models for School Science Lab....
Product Code: NLAB-0129 - (Engineering Training Cutaways Models for School Science Lab)
Engines Trainer (Selection) both Diesel and Gasoline, technical teaching equipment for engineering
....
Enginetestingrig&accessories - Compressiontesting
....
Entomological Pins Manufacturer, Supplier and Exporter for Biology Lab
.... Product Code: BGIT-0011 - (Entomological Pins for Biology Lab)
Environmental Test Chamber....
Product Code: NAAY-M33 - (Environmental Test Chamber)Environmental Test Chambers Description: We are a leading manufacturer & exporter of environmental test chamber. We also deal in bacteriological incubator & test chamber for lab.....
Product Code: NLAB-0130 - (Environmental Test Chambers for School Science Lab)
Equipment for Education, Engineering and Vocational Training - EPABX Trainer & Lab Training Kit - Telephone exchange an electronic boon to the mankind serving from decades for communication. Its one of the best combination of Analog, Digital & Mechanical circuits. The exchange technology has undergone many phase of changes ever since its existence. ST2657 Automatic Telephone Exchange Training / EPABX System forms the basic of telephone exchanges, EPABX technology study.Both manual and automatic switching can be performed. The functional blocks provides easy understanding of the working of the system. Visualizations of the switching and detections makes it unique. A DTMF Telephone Trainer is supplied for better understanding of Telephony. Technical Specifications Number of inputs : 2 Trunk / Direct Lines. Number of extension : 4 Lines. Technology : Cross Point Space Division (Microprocessor based) Standard Features : Tones such as Dial, Busy, Ring etc. Dialing - DTMF and Pulse (Ratio 10pps ) Program Memory : 64 Kb EEPROM Loop Resistance : Extension -600 Ohms, Co-line- 1200 Ohms. Cross Talk Attenuation : >70 dBm Test Points : More than 25 Nos. Power supply : 230 V ±10%, 50 Hz / 60 Hz on request Power Consumption : 40.25 VA (approx.) No. of switched faults : 8 No. of test points : 38 Features that can be set : Line Hunting, Direct Access to trunk line, Redial, Line Status Indication, Automatic call back, Do Not Disturb, Call Transfer, Call Pick Up, Direct Access Trunk Call Forwarding, Call parking, Conference, Hot line System, Extension Privacy, Call Transfer, Barge in. Included Accessories Telephone Instruments : 3 Nos. Telephone Trainer : 1 No. Extension line cords : 4 Nos. Software CD : 1 No. AC Adaptor : 1 No. Easy understanding of various units Use of functional blocks than traditional circuitry Study of various detection phenomena's Detailed circuit study LED visualizations Performing manual switching Study of switching Phenomena Study of traffic units Switched faults CD containing Working Presentation Supplied with DTMF Telephone Trainer Experiments that can be performed Generation of various Tones Dial, Tone, Busy Tone, Ring Back Tone. Measurement of Ring generation. Study & Analysis of Cross point Space Division switching. Study & Analysis of Manual switching. Analysis of Pulse / DTMF dialing from telephone (Extns). Measurement of Relay & Ring control signals. Study & analysis of ON / OFF hook, Ring detection. Study of power supply....
Product Code: CON-026-NE - (EPABX Trainer & Lab Training Kit for Vocational Training and Didactic Labs)
EPABX Trainer - Z80 Microprocessor based stored program control. 64KB Program memory (EPROM), 32KB Data RAM for buffer. Two DOT Lines, Four Extension Lines with Opto Isolation . Dial Tone, Busy Tone, Ring Back Tone, Hold-on music and other Tone Generation. Power Requirement is +11V, +23V, +5V, +15V.....
Product Code: ACT-TR-Z001 - (EPABX Trainer for Advance Communication Teaching Labs)
EPABX Trainer – EPABX Trainer Understanding Automatic Telephone Exchange / EPABX System
is an ideal training platform to learn the operation of Automatic
Telephone Exchange/ EPABX. It is demonstrator cum training system
specifically designed for the comprehensive practical study on Automatic
Telephone Exchange / EPABX System for the beginners with a basic
knowledge of the various electronic building blocks and fundamentals of
communication system. This didactic product develops the sense of
investigation within the student and familiarises him with repair
techniques/design techniques. One of the main features of this training
system is fault simulation to educate on actual fault finding, by
simulating faults on this platform. The complete block diagram of EPABX
System is printed on the mimic. Finally this equipment allows us to do
experiments and to observe waveforms/signals/voltages of different
sections, which are guided thoroughly by theory and product tutorials to
gain in-depth knowledge of the system.
Study of switching phenomena
Study of various detection phenomena
Study of traffic units
Complete Block diagram of EPABX system on-board
Easy identification of different sections and signal flow through LED visualizations
Easy measurement of voltages and observation of waveforms
Soldering free fault creation and troubleshooting....
Epicycle Gear Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG014 - (Epicycle Gear Engineering Training Model for engineering schools)Epicyclic Gear Sun & Planet type Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG015 - (Epicyclic Gear Sun & Planet type Engineering Training Model for engineering schools)
Epicyclic Gear Train Apparatus
The trainer consists of an Epcyclic gear box coupled to a variable speed
electric motor. Other end of the gear train is coupled to a brake drum
for measurement of transmitted torque. One more spring balance is used
to measure holding torque of the epicyclic gear train. Measuring
instruments are provided for measurement of Power supplied to the motor,
torque transmitted & speed.
Experimental Capabilities:
• To demonstrate operation of Epicyclic Gear Train.
• To measure holding torque & transmitted torque of Epicyclic Gear Train.
Technical Specifications:
• Variable Speed Motor: Capacity 0.5 hp @ 15400 RPM with speed controller
• Epicyclic Gear Train: Capacity 100 N-m, Speed Ration 4:1
• Brake Drum Pulley
• Spring Balance – 2 Nos.
• Voltmeter & Ammeter for Power consumption of Motor.
• Tachometer for Speed Measurement
• Base Frame: MOC – M. S. Square pipes & Angles, Powder Coated
• Electric Switches & Wiring
....
Product Code: TML003 - (Epicyclic Gear Train Apparatus for engineering schools)
Epicyclic Gear Train Holding Torque Apparatus
.... Product Code: Technical0023 - (Epicyclic Gear Train Holding Torque Apparatus)Epicycloid Coaxial Reducer
This product is a cut-away model of a Epicycloid Coaxial Reducer. It is mounted on a base.....
Eprom Eraser - Auto shut OFF after predetermined time, selectable by the Timer. Built in spring loaded mechanical timer with auto rewinding for setting time 0-30/60 minutes. 6\"/9\" Ultra Violet Tube. 8 to 10 EPROMs can be erased at a time.....
Product Code: EPM-PR-04 - (Eprom Eraser for Eprom Programmer Teaching Labs)Equipment for Education, Engineering and Vocational Training - FEATURES 6"/9" UV Tube providing UV Light of 2735 degree wave length Mechanical timer for 60 minutes to set time Can erase 8-10 EPROMs at a time within 10-15 minutes 230V, 50Hz mains operation EPROMs of 2716, 2732, 2516, 2532, 2764, 27128, 8755 etc.....
Product Code: NPLT-EC018 - (EPROM Eraser for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Copying facility from MASTER to 4 SLAVES at a time. Supports EPROM, EEPROM & FLASH MEMORY Best suited for mass production of VCD/DVD/PCO/TV etc. PC interface through Serial (RS-232) Port Interface Software supports Windows 9x/XP/NT/ME/2K 16 x 2 LCD Display (backlit) 4 keys to perform Program, Verify, Blank Check, Lock, Erase, Checksum & Select. Supply voltage: +9V, 600mA from DC Adapter Device update possible DEVICE SUPPORT: EPROMs: AMD/MMI, Atmel, Intel, NEC, NS, ST, Holtek, Macronix, SST, Winbond, MTP etc. EEPROM/FLASH: AMD, Atmel, Winbond, Intel, SST, SyncMos, Linkage, Macronix, ST, Dallas, EON, LinkSmart, Mosel_Vitelic, PTC, AST, PMC, AMIC, BenchMarq etc. SERIAL EEPROM: Atmel, ST, AKM, ROHM, ISSI etc.....
Product Code: NPLT-EC013 - (EPROM Gang Programmer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Copying facility from MASTER to 8 SLAVES at a time. Supports EPROM, EEPROM & FLASH MEMORY Best suited for mass production of VCD/DVD/PCO/TV etc. PC interface through Serial (RS-232) Port Interface Software supports Windows 9x/XP/NT/ME/2K 16 x 2 LCD Display (backlit) 4 keys to perform Program, Verify, Blank Check, Lock, Erase, Checksum & Select. Supply voltage: +9V, 600mA from DC Adapter Device update possible DEVICE SUPPORT: EPROMs: AMD/MMI, Atmel, Intel, NEC, NS, ST, Holtek, Macronix, SST, Winbond, MTP etc. EEPROM/FLASH: AMD, Atmel, Winbond, Intel, SST, SyncMos, Linkage, Macronix, ST, Dallas, EON, LinkSmart, Mosel_Vitelic, PTC, AST, PMC, AMIC, BenchMarq etc. SERIAL EEPROM: Atmel, ST, AKM, ROHM, ISSI etc.....
Product Code: NPLT-EC014 - (EPROM Gang Programmer for Vocational Training and Didactic Labs)
Equopen Swiss Portable Hardness Tester for NDT Metal Testers - Simple one-handed operation. Fast accurate hardness test. Compact, lightweight and portable. Self contained no cables. Displays directly in Rockwell C scale Application Range : 1. Ideal for consultants, machinists, quality and production personnel with periodic requirements for quick and easy hardness measurements in HRC 2. Measures 20 - 70 HRC, ± 1 HRC 3. Parts weighing less than 5 kg (11 lbs.) with thin walls must be set on a solid support to prevent vibrations 4. Parts weighing less than 2 kg (4.5 lbs.) must be coupled to a solid support using coupling paste 5. Minimum surface layer thickness: 0.7 mm 6. Minimum test radius of surface curvature: R = 30 mm (1.18 in.) 7. Steel and cast steel, cold work tool steel, stainless steel and hightemperature resistant steel....
Product Code: NANM-M3 - (Equopen Swiss Portable Hardness Tester For Testing Lab for NDT Metal Testers Lab)
Equostat Hardness Tester for NDT Metal Testers - Static Low-Load Measurement based on the Rockwell Principle. Accurate, rapid, and reproduceable results from measurement of penetration depth under defined forces and therefore - Independence of material (no choice of material curves necessary) - Independence of body dimensions and geometry - Measures from one side - no backing necessary Excellent sensitivity through small penetration of a few µm and therefore particularly suitable for a. Scratch-sensitive and polished surfaces b. Thin parts, profiles and pipes with a wall thickness=2 mm c. Hardness profile in heat-affected zone of welding seams....
Product Code: NANM-M4 - (Equostat Hardness Tester For Testing Lab for NDT Metal Testers Lab)
Equotip 3 Portable Hardness Tester for NDT Metal Testers - Large, easy to read display with backlight. Highly accurate ± 4 HL. Automatic correction for impact direction. Converts to all common hardness scales (HV, HB, HRC, HRB, HS, Rm). Light weight and easy to use - Fast testing for a wide range of applications - Large memory with on-screen review of data - Download to PC or print directly via USB, Ethernet, or RS-232 - User profiles for fast change of all settings - Rugged sealed membrane keypad - Internal rechargeable batteries or standard \"C\" cells - Custom conversions for uncommon alloys - Standardized according to ASTM A956 - DIN 50156 - EQUOTIP 3, a high quality Swiss product Application Range : 1. Good for all metals 2. Deal for production level testing 3. Best suited for on-site testing of heavy, big or already installed parts 4. Handy for difficult to access or confined test locations 5. Automatic compensation for impact direction 6. Excellent for material selection and acceptance tests 7. Easy to use and accurate on curved test surfaces (R>10 mm) Primary Industries : Metal production & Processing Automotive & Transportation Machinery & Power Plants Petro-Chemical, Refineries Aerospace & shipyard Metal Constructions Testing Services & laboratories....
Product Code: NANM-M1 - (Equotip 3 Portable Hardness Tester For Testing Lab for NDT Metal Testers Lab)
Equotip Piccolo Portable Hardness Tester for NDT Metal Testers - The Most Advanced Integrated Tester - Portable Hardness Tester - Revolutionary impact device with single motion load & release mechanism - Highly accurate in any impact direction - automatically - Converts to all common hardness scales (HV, HB, HRC, HRB, HS, Rm) - Custom conversions for uncommon alloys - Statistics (average, standard deviation, min/max, range) - Internal, non volatile data storage of fully tagged readings - Instant reading from large, high-contrast LCD - Intelligent self diagnostics - Virtually unlimited impacts per battery charge cycle - Smart recharging of built in Li-Ion batteries while USB connected - USB: data and software transfer with versatile PC application - Ready for automatic testing Application Range : 1. Good for all materials 2. Ideal for production level testing 3. Best suited for on-site testing of heavy, big or already installed parts 4. Handy for difficult to access or confined test locations 5. Automatic sensing and compensation for impact direction 6. Excellent for material selection and acceptance tests 7. Easy to use and accurate on curved test surfaces (R>10 mm) Primary Industries : Metal production & processing Automotive & transportation Machinery & power plants Petro-Chemical, refineries Aerospace & shipyard Metal constructions Testing services & laboratories....
Product Code: NANM-M2 - (Equotip Piccolo Portab for engineering schoolsle Hardness Tester for NDT Metal Testers Lab)Erbium (III) Acetate....
Product Code: NECHEMICAL-L601401 - (Erbium (III) Acetate)Erbium (III) Carbonate....
Product Code: NECHEMICAL-L601402 - (Erbium (III) Carbonate)Erbium (III) Chloride....
Product Code: NECHEMICAL-L601403 - (Erbium (III) Chloride)Erbium (III) Iodide....
Product Code: NECHEMICAL-L601404 - (Erbium (III) Iodide)Erbium (III) Nitrate....
Product Code: NECHEMICAL-L601405 - (Erbium (III) Nitrate)Erbium (III) Sulfate....
Product Code: NECHEMICAL-L601407 - (Erbium (III) Sulfate)Erbium Atomic Absorption Standard Solution....
Product Code: NECHEMICAL-L400030 - (Erbium Atomic Absorption Standard Solution)Eriochrome Cyanine R....
Product Code: NECHEMICAL-L3002023 - (Eriochrome Cyanine R)Erlenmeyer Flask Description: Engaged in supplying and exporting of erlenmeyer flasks, erlenmeyer flasks sealed with parafilm, erlenmeyer flasks sealed with rubber, erlenmeyer flasks sealed with cork stoppers used for general measuring and juice containers.....
Product Code: NLAB-0131 - (Erlenmeyer Flask for School Science Lab)
