Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Orifice Discharge Apparatus
The Orifice Discharge accessory consists of a cylindrical Clear
acrylic tank which has an orifice fitted in the base. A traverse
assembly is provided which enables a pitot tube to be positioned
anywhere in the jet. Attached to this pitot tube is a fine wire which
can be traversed across the jet to accurately measure the jet diameter
and the vena contracta diameter and so determine the contraction
coefficient.
The pitot head and the total head across the orifice are shown on manometer tubes adjacent to the tank.
In
addition to the sharp edged orifice, four additional orifices with
different profiled are supplied. All orifices have a common bore of 13mm
for direct comparison of performance.
The Orifice Discharge accessory enables full analysis of the flow through five different orifices over a range of flow rates.
Experimental Capabilities:
Specifications:
.... Product Code: NEGEMG134 - (Orifice Discharge Apparatus)
ORIFICE METER for engineering schools....
Product Code: MCH007 - (ORIFICE METER for engineering schools)
Original Alternator Trainer, technical teaching equipment for engineering
Original Alternator Trainer & Demo Teaching Unit mounted on wooden bases....
Original Generator Trainer, technical teaching equipment for engineering
These 12 Volt DC Generators are available for a variety of uses in the
classroom and workshop. The operable starters are fully functional and
can be provided new or reconditioned and if desired they can be mounted
on wooden bases. The operable units can be used for demonstration
purposes, exhibits, as replacement parts for engines or for use with the
Labtech alternator/generator test bench.....
Original Starter Motor Trainer, technical teaching equipment for engineering
These 12 Volt Starter Motors are available for a variety of uses in the
class room and workshop. The operable starters are fully functional and
can be provided new or reconditioned and if desired they can be mounted
on wooden bases. The units can be used for demonstration purposes,
exhibits, as replacement parts for engines or for use with the Labtech
starter motor test bench....
Oropharyngeal Guedel Airways
.... Product Code: HMEDLAB-48-10003 - (Oropharyngeal Guedel Airways)
Ortho Phosphoric Acid....
Product Code: NECHEMICAL-L2001023 - (Ortho Phosphoric Acid)
Orthopaedic OT Table Electric
.... Product Code: HMEDLAB-OTBL-10010 - (Orthopaedic OT Table Electric)Orthopaedic Plaster Table
.... Product Code: HMEDLAB-33-10002 - (Orthopaedic Plaster Table)Orthopedic Extension Device Description: Deals in supplying and manufacturing of orthopedic extension device....
Product Code: NLAB-0277 - (Orthopedic Extension Device for School Science Lab)
OSBORNE REYNOLDS APPARATUS
.... Product Code: Workshop Lab - HBW0026 - (OSBORNE REYNOLDS APPARATUS)
Osborne Reynolds Demonstration
The equipment operates in a vertical mode. A header tank containing
stilling media provides a constant head of water through a bellmouth
entry to the flow visualisation pipe. Flow through this pipe is
regulated using a control valve at the discharge end. The flow rate of
water through the pipe can be measured using the volumetric tank (or
measuring cylinder) of the Hydraulics Bench. Velocity of the water can
therefore be determined to allow calculation of Reynolds’ number.
Experimental Capabilities:
Specifications:
.... Product Code: NEGEMG137 - (Osborne Reynolds Demonstration)
Equipment for Education, Engineering and Vocational Training - Oscillation on a Bifilar Suspension Trainer Oscillation on a Bifilar Suspension Trainer....
Product Code: ETKN-0492 - (Oscillation on a Bifilar Suspension Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Oscillator and Null Detector Trainer Oscillator and Null Detector Trainer....
Product Code: ETKN-0493 - (Oscillator and Null Detector Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Oscillators Trainer Oscillators Trainer....
Product Code: ETKN-0494 - (Oscillators Trainer for Vocational Training and Didactic Labs)
Oscilloscope 50MHz We are Leading Supplier of Oscilloscope 50MHz in India. We also bulk supply Oscilloscope 50MHz for laboratory tensers. Technical Specifications Dual Trace VERTICAL : Channels : 2 Bandwidth : DC ~ 50MHz (-3dB) Rise Time : <7ns Approx. Sensitivity : 2mV/div ~ 10V/div (1-2-5 increments) Accuracy : ±(3% x [Readout] + 0.1 div + 1mV) Input Coupling : AC, DC & Ground Input Impedance : 1MΩ ±2%, ~ 15pF Polarity : Normal & Invert Input : 300V (DC+AC peak), CAT II Waveform Signal Process : +, -, FFT Offset Range : 2mV/div ~ 50mV/div : ±0.4V, 10mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V, 10V/div : ±300V Bandwidth Limit : 20MHz (-3dB) Trigger : Sources : CH1, CH2, LINE, EXT Modes : Auto, Normal, Single, TV, Edge, Pulse Width Coupling : AC, DC, LF rej, HF rej, Noise rej, Sensitivity : DC ~ 25MHz : Approx. 0.5 div or 5mV 25MHz ~ 50/70/100MHz : Approx. 1.5 div or 15mV Ext. Trigger : Range : ±15V Sensitivity : DC ~ 25MHz : ~ 50mV; 25M ~ 50/70/100MHz : ~ 15mV Input Impedance : 1MΩ±2%, ~ 16pF Input : 300V (DC AC peak), CAT II Horizontal : Range : 1ns/div ~ 50s/div (1-2-5 increments) : ROLL : 50ms/div ~ 50s/div Modes : Main, Window, Window Zoom, Roll, X-Y Accuracy : ± 0.01% Pre-Trigger : 10 div max. Post trigger : 1000 div X-Y Mode : X-Axis Input : Channel 1 Y-Axis Input : Channel 2 Phase shift : ±3° at 100 KHz Signal Acquisition : Real Time Sample Rate : 250MSa/s Equivalent Sample Rate : 25GSa/s Vertical Resolution : 8 Bits Record Length : 4K Dots max. Acquisition mode : Normal, Peak, Detect, Average Peak Detection : 10ns ( 500ns/div ~ 50s/div) Average : 2, 4, 8, 16, 32, 64, 128, 256 Cursor And Measurement : Voltage Measurement : Vpp, Vamp, V avg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot / Overshoot, Fall Preshoot / Overshoot Time measurement : Freq. Period, Rise Time, Positive Width, Negative Width, Duty cycle Cursor measurement : Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) Display : TFT LCD Type : 5.7 inch Display Resolution : 234 x 320 Dots Display Graticule : 8 x 10 divisions Display Brightness : Adjustable ....
Product Code: Physics Lab0014 - (Oscilloscope 50MHz)
Oscilloscope Demonstrator Trainer -Oscilloscope Demonstrator Trainer - Oscilloscope Demonstrator Trainer is specifically designed for the study of working of an oscilloscope in an open form. The Controls are placed actually at the place as they are in the layout schematic. Thus a trainee can easily locate any section & components in the section and study it thoroughly. The function controls and the adjustment controls are fully accessible to the trainee to verify their effect on the working of the scope. Creation of Faults and rectification of faults are important exercise covered in the experiments. An illustrated Block and Circuit Schematic and the adjustment plan right in front of the trainee's eyes help him to correlate each operation during the demonstration.
Oscilloscope in open form with all components and controls placed on single PCB
Amplifier, Time base, Channel section signal available on test points
Separate sections for PS, EHT, VA, HA, TB & Trigger for easy identification
Fault creation & Rectification provided
Track printing with different colours on different sections on component board for easy circuit training
Legend Printing on PCB for easy identification of components
Can be used as a standard 20 MHz Dual Trace Oscilloscope
Oscilloscope Dual Trace 20 MHz Manufacturer, Supplier and Exporter for Physics Lab
.... Product Code: PECS-0001 - (Oscilloscope Dual Trace 20 MHz for Physics Lab)
Oscilloscope Single Trace 10 MHz Manufacturer, Supplier and Exporter for Physics Lab
.... Product Code: PECS-0002 - (Oscilloscope Single Trace 10 MHz for Physics Lab)
Equipment for Education, Engineering and Vocational Training - Oscilloscope Trainer & Oscilloscope Lab Kit for Training - Oscilloscope Demonstrator Trainer is specifically designed for the study of working of an oscilloscope in an open form. The Controls are placed actually at the place as they are in the layout schematic. Thus a trainee can easily locate any section, & components in the section and study it thoroughly. The function controls and the adjustment controls are fully accessible to the trainee to verify their effect on the working of the scope. Creation of Faults and rectification of faults are important exercise covered in the experiments. An illustrated Block and Circuit Schematic and the adjustment plan right in front of the trainee's eyes helps him tocorrelate each operation during the demonstration. Oscilloscope in open form with all components and controls placed on single PCB Amplifier, Time base, Channel section signal available on test points Separate sections for PS, EHT, VA, HA, TB & Trigger for easy identification Fault creation & rectification provided Track printing with different colours on different sections on component board for easy circuit training Legend Printing on PCB for easy identification of components Can be used as a standard 20 MHz Dual Trace Oscilloscope Technical Specifications Operating Modes Channel I, Channel II, Channel I & II Alternate or chopped, Controls provided on PCB. Channel selection signals available at Test points. X-Y operation 1:1 Vertical deflection (Y): (Identical channels) Bandwidth : DC-20 MHz (-3 dB) Risetime : 17.5 ns (approx.) Deflection coefficients : 12 calibrated steps 5 mV / cm - 20 V / cm (1-2-5 sequence) Accuracy : ±3 % Input Impedance : 1 MW II 30 pF Input coupling : DC - AC - GND Maximum Input voltage : 350 V (DC + Peak AC) Pre-Amp, Final Amp Outputs at Test Points. Timebase: Time coefficients : 18 calibrated steps, 0.5 ìs / cm - 0.2 s / cm (1-2-5 sequence) with magnifier x 5 to 100 ns / cm, with variable control to 40 ns / cm Accuracy : ± 3 % (in Cal position) TB generation at Test Points Sweep Output : 5 V (approx.) Trigger System: Modes : Automatic or Variable Source : CH I, CH II, External Slope : Positive or Negative Coupling : AC, TV Frame Sensitivity : Int 5 mm, Ext 1 V (approx.) Trigger Bandwidth : 30 Mhz Horizontal Deflection (X) Bandwidth : DC - 2 MHz (-3 dB) X - Y mode : Phase Shift < 5° at 50 KHz Deflection coefficients : 12 calibrated steps 5 mV / cm - 20 V / cm (1-2-5 sequence) Input Impedance : 1 MW II 30 pF Component Tester : Test Voltage : Max 8.6 V (Open) rms Test Current : Max 8 mA (Shorted) rms Test Frequency : 50 Hz, Test circuit grounded to chassis General Information Cathode Ray Tube : 140 mm Rectangular medium short persistence (P31) Accelerating potential : 1.9 KV (approx.) Display : 8 ×10 cm Calibrator : Square Wave generator 1 KHz (approx.), 0.2 V ±1% for probe compensation Z Modulation : TTL level Stabilized Power Supply : All operating voltages including the EHT Power Supply : 220 V ±10 %, 50 Hz / 60 Hz on request Power Consumption : 40 VA(approx.) Weight : 7.3 Kg (approx.) Dimensions (mm) : W 450 × D 420 × H 145 Operating Temp. : 0-40°, 95 % RH Finish : Off white with side handle Fault Simulation : Total 15 Faults included Included Accessories : DMM 1 No., Manual 1 No., Student manual 1 No., BNC-BNC Cable 1 No., BNC - Probe tip Cable 1 No., Test Prods 1 pair,. Additional Jumpers 10 Optional Accessories : Switchable Probe X 1 - X 10....
Product Code: CON-008-NE - (Oscilloscope Trainer & Oscilloscope Lab Kit for Training for Vocational Training and Didactic Labs)
Osmosis Kit Manufacturer, Supplier and Exporter for Biology Lab
.... Product Code: BGIT-0041 - (Osmosis Kit for Biology Lab)
Ostwald Viscometer Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0103 - (Ostwald Viscometer for Science Lab)Outboard Marine Reverser
This product is a cut-away of an outboard marine reverser. It is a mechanical, universal type, reverse installed on marine outboard motors. It is operated manually by hand crank, and it is mounted on a base.....
Outboard Motor - 28....
Product Code: ADM-195 - (Outboard Motor - 28 for Electric Motors Teaching Labs)
Outboard Trainer Engine, technical teaching equipment for engineering
....
Outdoor Display Units School Lab Furniture Exporters....
Product Code: EDUFURNITURE00016 - (Outdoor Display Units 1)
Outdoor Display Units ... School Lab Furniture Exporters....
Product Code: EDUFURNITURE00017 - (Outdoor Display Units 2)
Outdoor Display Units Boards - Built with a plastic composite outer shell that will stand up to the elements. The durability and strength of these cases are unmatched and will provide a wood-look touch to your posting needs. Vinyl surface available in different colors will hold up to constant use. Available in different sizes and color
....
Oven Hot Air Manufacturer, Supplier and Exporter for Chemistry Lab
.... Product Code: CGEN-0144 - (Oven Hot Air for Chemistry Lab)
Over Current Relay Testing System - LCD Voltmeter, Ammeter, Automatic Timer. Inbuilt Variable AC Supply. Big font LCD Display for better visibility....
Product Code: EET-TR-36 - (Over Current Relay Testing System for Electrical Engineering Teaching Labs)
Overbed Bedside Table 2 Section
.... Product Code: HMEDLAB-41-10001 - (Overbed Bedside Table 2 Section)Overbed Bedside Table Adjustable Gear Handle
.... Product Code: HMEDLAB-41-10002 - (Overbed Bedside Table Adjustable Gear Handle)Overbed Bedside Table Adjustable Manual
.... Product Code: HMEDLAB-41-10003 - (Overbed Bedside Table Adjustable Manual)Overbed Bedside Table Fixed Sunmica Top
.... Product Code: HMEDLAB-41-10004 - (Overbed Bedside Table Fixed Sunmica Top)
Overhead Camshaft Engine with Toothed Timing Belt
.... Product Code: TechnicalLab0249 - (Overhead Camshaft Engine with Toothed Timing Belt)
Overhead Projector with Dual Lamp System Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0017 - (Overhead Projector with Dual Lamp System for Science Lab)Overhead Projectors Description: We are a leading manufacturer & exporter of overhead projector with dual lamp system.....
Product Code: NLAB-0278 - (Overhead Projectors for School Science Lab)
Overhead Valve Engine, with Timing Chain
.... Product Code: TechnicalLab0250 - (Overhead Valve Engine, with Timing Chain)
Overview of PID Controller Trainer - Overview of PID Controller Trainer - compact and user friendly learning
platforms to provide a modern, portable, comprehensive and practical way
to learn Technology. Each TechBook is provided with detailed Multimedia
learning material which covers basic theory, step by step procedure to
conduct the experiment and other useful information. In Control System
there are different types of Controllers. Study of twoposition mode as
ON/OFF Controller and continuous Controller modes as PID controller is a
very important part of control engineering. To have a basic idea and
practical hands on Controllers PID Techbook has been designed to be used
by students to investigate the principles of PID by applying different
signals. With Scientech TechBook 2451 Overview of PID Controller
Students can study two-position mode as ON/OFF Controller and continuous
Controller modes as P-control mode, I-control mode, D-control mode,
PI-control mode, PD-control mode and PID control mode. These modes of
Controller can be performed individually and also with different
combinations in open loop and close loop system.
Users can easily understand the difference between the different modes
of Controllers used. Square wave, triangular wave generator variable DC
supply as set point and disturbance generator are provided on board.
Effect of PID can be seen on first order system and second order system in open loop and close loop system.
Proportional, Integral and Derivative functions can be checked on
same board ( configurable as P,I,D, PI, PD,PID ) ON/OFF controller.
Square and triangular wave with variable frequency for testing P I D.
Variable DC for set point.
Error detector.
Ist order system & IInd order system.
In built power supply.
Dead zone and disturbances generator.
Built-in 3 DVM for DC measurement with three range selection.
Test point at varies block to measure and observe the signals.
Easy to operate and understand.
Manual describing working of trainer along with detailed experiment descriptions.....
Oxalic Acid 0.025M (0.05N) Solution....
Product Code: NECHEMICAL-L3003024 - (Oxalic Acid 0.025M (0.05N) Solution)
Oxo Biodegradable Bags
.... Product Code: HMEDLAB-BIZD-10005 - (Oxo Biodegradable Bags)Oxygen Meters Description: Manufacturer of microprocessor dissolved oxygen meter, hygrometer, distance meter, digital barometer, calorimeter & weather barometer.....
Product Code: NLAB-0279 - (Oxygen Meters for School Science Lab)Oxytetracycline Hydrochloride....
Product Code: NECHEMICAL-L5004024 - (Oxytetracycline Hydrochloride)
