Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Equipment for Education, Engineering and Vocational Training - Universal Motor Speed Control Trainer Universal Motor Speed Control Trainer....
Product Code: ETKN-0723 - (Universal Motor Speed Control Trainer for Vocational Training and Didactic Labs)Universal Motors - 22....
Product Code: ADM-211 - (Universal Motors - 22 for Electric Motors Teaching Labs)This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this
rack can be used for tubes of ¢30mm, ¢20mm, ¢17mm & ¢12mm
Material : Polycarbonate....
for Soil Testing - This motorized machine with electronic digital control by microprocessor is suitable to perform all the tests where the requested speed rate is within 0.1 to 61.0 mm/min.with Max. load of 50 kN IT CAN THEREFORE PERFORM: Unconfined test with rate of 0.635 mm/min CBR test with rate of 1 mm/min (BS Standards) CBR test with rate of 1.27 mm/min (ASTM, CNR/UNI, NF, AASHTO) Marshall test with rate of 50.8 mm//min. Duriez test with rate of 60 mm/min (NF French Spec.) The speed rate is infinitely variable, easily and promptly selected. Upper beam can be adjusted in height. Foreseen of electric end of stroke switches of the load plate to save the machine from wrong manipulations. The machine is supplied “without”S type load cell and accessories which have to be ordered separately. POWER SUPPLY: 230 V Single Phase 50 Hz Suitable for operation on 230 V A.C.....
Product Code: P62 - (Universal Multispeed Frame 50kNUniversal Multispeed Frame 50kN For Testing Lab for Soil Testing Lab)
for Soil Testing - Same as above but instead of a set of three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, bore tube is provided with over flow arrangement for constant head tests. The remaining tubes are used for falling head test.....
Product Code: NSOL-T30 - (Universal Permeability For Testing Lab for Soil Testing Lab)Universal Pipette Tips....
Product Code: NLGP-0219 - (Universal Pipette Tips for Science Lab)
Universal Programmer Tester - Device supports more than 4000+ devices, 40 Pin ZIF socket with universal pin-drivers to supports 8-pin to 40-pin DIP package device, USB Interface to LAPTOP & PC and High speed programming, Cost effective Hardware and Flexible Software.....
Product Code: EPM-PR-01 - (Universal Programmer Tester for Eprom Programmer Teaching Labs)
Universal Programmer Tester - Device supports more than 15000+ devices, 48 Pin ZIF socket with universal pin-drivers. to supports 8-pin to 40-pin DIP package device - USB Interface to LAPTOP & PC. - High speed programming, Cost effective Hardware and Flexible Software....
Product Code: EPM-PR-03 - (Universal Programmer Tester for Eprom Programmer Teaching Labs)
Universal Programmer Tester PR-02 - Device supports more than 7000+ devices. Our Testers are offered with 48 Pin ZIF socket with universal pin-drivers to supports 8-pin to 40-pin DIP package device, USB Interface to LAPTOP & PC, High speed programming, Cost effective Hardware and Flexible Software, Top-3000-Universal Programmer-Tester and the Device supports more than 15000+ devices. - 48 Pin ZIF socket with universal pin-drivers to supports 8-pin to 40-pin DIP package device - USB Interface to Laptop & PC - High speed programming, Cost effective Hardware and Flexible Software....
Product Code: EPM-PR-02 - (Universal Programmer Tester PR-02 for Eprom Programmer Teaching Labs)This Universal Reagent Reservoir is a graduated single reagent reservoir with maximmum volume
of 50ml, reservoir with 8 separate numbered 5ml. reagent channels & a reservoir with 12 separate numbered 5 ml. reagent channels. Made of polypropylene
these reagent reservoirs are repeatedly autoclavable and can be used with all multi-channel pipettes.
Material :Polypropylene
Size: 50 ml....
Equipment for Education, Engineering and Vocational Training - Universal Shift Register Trainer Universal Shift Register Trainer....
Product Code: ETKN-0724 - (Universal Shift Register Trainer for Vocational Training and Didactic Labs)
Universal Test System Trainer - Proven DSP and switching technology - Fast & accurate, Modular Plug-in design, All generators are protected against overload and short circuit
....
Universal Testing Machine Universal Material Tester, 20 Kn, Max. test force: 20kN, Max. stroke: 45 mm, Space available for specimens: 165x65mm, Tensile specimens: B6x30mm, DIN 50125, Hardness specimens: l x w x h 30x30x10mm, Dynamometer: measuring range: 0-20kN, graduations: 0.5kN, Dial gauge: measuring range: 0 - 10mm, graduations: 0.01mm.....
Product Code: WP 300 - (Universal Testing Equipments)
Universal Testing Instruments We are Leading Supplier of Universal Testing Instruments in India. We also bulk supply Universal Testing Instruments for laboratory tensers. Features : The Universal Testing Instruments suitable for experiments : Tensile, Compression, Bending and Shear testing for all kinds of metal materials and non metal materials such as plastic, concrete, cement and so on. Frame space : Dual. Change between tension and compression test : Quick without removing heavy fixtures. Technical Specifications : • Maximum Testing Power : 1000 KN • Software : PC controlled electro – hydraulic servo UTM software • Test power precision : ±1% • Test power distance : 2% – 100% FS • Displacement measurement : 0.01 mm • Max. lift speed of testing board : 70 mm/min • Piston travel : 150 mm • Maximum tension distance : 700 mm • Maximum compression distance : 0 – 470 mm • Clamp diameter of round specimen : 20 – 60 mm • Clamp thickness of flat specimen : 0 – 40 mm • Clamp width of flat specimen : 80 mm • Size of compression plate : 205 x 205 mm • Bending stick distance : 500 mm • Bending stick width : 140 mm • Bending degree allowance : 150 mm • Oil pump power : 1.5 KW • Low grip motor power : 1.1 KW • Distortion testing device : Staff • Overload protection : 2 – 5% ....
Product Code: Civil Engineering0032 - (Universal Testing Instruments)
for Universal Testing - Universal Testing Machine - (Hydraulic) Mechanical Version: Universal Testing Machine is designed for testing metals and other materials under tension, compression, bending, transverse and shear loads. Hardness test on metals can also be conducted.
Loading accuracy as high as ± 1% Straining at variable speeds to suit a wide range of materials Motor driven threaded columns for quick effortless adjustment of lower cross-head to facilitate rapid fixing of test specimen Continuous roll autographic recorder supplied as standard to enable study of the behaviour of materials High reading accuracy due to large size and design of dial Large effective clearance between columns enables testing of standard specimens as well as structures Easy change from plain to threaded and screwed specimens Robust staining frame of an extremely rigid construction Fully enclosed and protected pendulum Simple controls for ease of operation operation ensured by means of safety devices Wide range of standard and optional accessories, including load stabilizer Chrome Plated Metal Components Plain & threaded columns. are hard chrome-plated to give the machine a perpetual new look.
Principle of Operation :
Operation of the machine is by hydraulic transmission of load from the
test specimen to a separately housed load indicator. The hydraulic
system is ideal since it replaces transmission of load through levers
and knife-edges, which are prone to wear out and damage due to shock on
rupture of test pieces. Load is applied by a hydrostatically lubricated
ram. Main cylinder pressure is transmitted to the cylinder of the
pendulum dynamometer system housed in the control panel. The cylinder of
the dynamometer is also of self-lubricating design. The load
transmitted to the cylinder of the dynamometer is transferred through a
lever system to a pendulum. Displacement of the pendulum actuates the
rack and pinion mechanism which operates the load indicator pointer and
the autographic recorder. The deflection of the pendulum represents the
absolute load applied on the test specimen. Return movement of the
pendulum is effectively damped to absorb energy in the event of sudden
breakage of specimen.
The Machine consists of :
STRAINING UNIT:
This consists of a hydraulic cylinder, motor with chain and sprocket
drive and a table coupled with the ram of the hydraulic cylinder,
mounted on to a robust base. The cylinder and the ram are individually
lapped to eliminate friction. The upper cross-head is rigidly fixed to
the table by two straight
columns. The lower cross-head is connected to two screwed columns which
are driven by a motor. Axial loading of the ram is ensured by relieving
the cylinder and ram of any possible side loading by the provision of
ball seatings. An elongation scale, with a minimum graduation of 1 mm,
is provided to measure the deformation of the specimen. Tension test is
conducted by gripping the test specimen between the upper and lower
cross-heads. Compression, transverse, bending, shear and hardness tests
are conducted between the lower cross- head and the table. The lower
cross-head can be raised or lowered rapidly by operating the screwed
columns, thus facilitating ease of fixing of the test specimen.
CONTROL PANEL:
The control panel consists of a power pack complete with drive motor and
an oil tank, control valves, a pendulum dynamometer, a load indicator
system and an autographic recorder.
POWER PACK:
The power pack generates the maximum pressure of 200 kgf/cm². The
hydraulic pump provides continuously non-pulsating oil flow. Hence the
load application is very smooth.
HYDRAULIC CONTROLS:
Hand operated wheels are used to control the flow to and from the
hydraulic cylinder. The regulation of oil flow is infinitely variable.
Incorporated in the hydraulic system is a regulating valve, which
maintains a practically constant rate of piston movement.
LOAD INDICATOR SYSTEM:
This system consists of a large dial and a pointer. A dummy pointer is
provided to register the maximum load reached during the test. Different
measuring ranges can be selected by changing relevant weights on the
pendulum and operating the range selection knob. An overload trip switch
is
incorporated which automatically cuts out the pump motor when the load
range in use is exceeded.
PENDULUM DYNAMOMETER:
This unit permits selection of favourable hydraulic ratios producing
relatively small frictional forces. Pressurised oil in the loading
cylinder pushes up the measuring piston proportionately and actuates the
special dynamometer system. The piston is constantly rotated to
eliminate friction. The
dynamometer system is also provided with an integral damper and ensures
high reliability of operation. The load transmitted to the dynamometer
is transferred through a pendulum to the load indicator.
AUTOGRAPHIC CONTINUOUS ROLL LOAD- ELONGATION RECORDER:
This unit is of the pen and drum type and is supplied as a part of
standard supply. The horizontal motion of the pen produces the load
co-ordinate of the diagram and the drum rotation produces the extension
co-ordinate, in the ratio of either 1:5 or 1:10. A continuous roll of
graph paper is stored inside the drum and is easily replaced.
ACCURACY AND CALIBRATION:
All Universal Testing Machines are closely controlled for sensitivity,
accuracy and calibration during every stage of manufacture. Every
machine is then calibrated over each of its measuring ranges in
accordance with the procedure laid down in British Standards 1610:1964
and IS: 1828-1975.
Universal Testing Machines comply with Grade "A" of BS : 1610 and Grade 1.0 of IS :1828 An accuracy of ±1% is maintained from 20% of the load range selected to full load.
STANDARD ACCESSORIES (COMMON FOR ALL UNIVERSAL TESTING MACHINES)
FOR TENSION TEST :
Clamping Jaws for Testing Round Specimens under Tension
Clamping Jaws for Testing Flat Specimens under Tension
FOR COMPRESSION TEST :
Pair of Platens Duly Hardened, Ground and Polished with Bottom
Platen provided with Guide Lies for Conducting Compression Tests
FOR BENDING / TRANSVERSE TEST :
Table with Adjustable Rollers complete with Mandrel for conducting Bending / Transverse Tests
OPTIONAL ACCESSORIES FOR UNIVERSAL TESTING MACHINES
The Universal Testing Machine is made more versatile and utility
oriented for carrying out a number of other tests as well with
Accessories/Attachments that are Optional. These Optional Accessories/
Attachments are priced nominally and are quite indispensable especially
for Technical Institutions.
Load Stabilizer
Brinell Hardness Test Attachment
Double Shear Test Attachment : Small & Large
180º Bend Test Attachment
Bare Attachment
Bushes for Testing Threaded Specimens
Bushes for Testing Collared Specimens
Attachment for Testing Wire & Manila Ropes
Extensometers : Mechanical/Electronic with Fixed & Variable
Gauge Length
Flexure Testing Attachment
for Universal Testing - Universal Testing Machine - Hydraulic Computerized Version - Peak load along with on line load
Maximum elongation with online elongation
Ultimate Tensile Strength
Graphical Display of Load vs. Time
Graphical Display of Elongation vs. Time
Graphic Display of Load vs. Elongation
Graphic Display of Stress vs. Strain
Complete Statistical Analysis
Data Report Management
SAFETY FEATURES
Machine stops after specimen failure
Safety against Over travel of piston
Safeguard against high temperature
Surge Protector
Auto Machine Diagnosis
Safety against overload
PC CONFIGURATION
Processor: Pentium IV / AMD 64 BIT
Processing Speed: 2.0 GHz or higher
Hard Disk Drive: 80 GB
RAM: 256 MB
CD ROM: 52 X
F.D.D.: 1.44 MB
Colour Monitor: 17" SVGA
Key Board: 104 Key
Printer : Inkjet
Printer : Laser ( Optional at extra cost )
Mouse Optical
UPS of at least 600 VA capacity
SOFTWARE
Pre-loaded with window 2000 based software
The software provided on CD ROM also
Automatic saving and providing data base for carrying out statistical calculation of multiple test results
Software application shall be capable of providing functions like Auto Return to Zero
Also available Hydraulic Grips
NOTE :
Computer Desktop / Laptop is not included in the price of machine
....
for Universal Testing - Universal Testing Machine - Hydraulic Electronic Microprocessor Based - Ergonomically designed State of the Art Technology Microprocessor based Digital Indicator Unit. Channels, one for digital display of load in KN/KGF and the other for Displacement in mm in bright, shadow-less display. Feather-touch push buttons for Tare, Peak Hold – Load, Peak Hold – Displacement and Auto Calibration. Bright Digital Display. Resolution 10,000 Counts for load. Resolution for Displacement 0.01 mm
Optional :
1. Resolution - 20,000 Counts for load and 0.01 mm or 0.001 mm for elongation as per requirement at extra cost
2. PC with Software and Printer
3. Provision of Analogue display with Autographic Recorder
4. RS 232 serial port
5. Printer Port....
Universal Testing Machine....
Product Code: LABS-EDU-0089 - (Universal Testing Machine for Teaching Equipments Lab)
for Universal Testing - Universal Testing Machine Servo Control Computerized Version - Stress Controlled kN/Min. Strain Controlled mm/min. Torque compensated power pack. Air cooled Inter cooler, 100% control via RJ 45, On - Board characteristics linearising, Fully Computer controlled
- TORQUE COMPENSATED POWER PACK
- STATE OF THE ART TECHNOLOGY ELECTRONIC CIRCUIT
- UNIVERSAL TESTING MACHINE ACCESSORIES - EXTENSOMETERS
....
Universal Vibration Apparatus for engineering schools....
Product Code: TML0010 - (Universal Vibration Apparatus for engineering schools)
Universal Vibration Machine
- Dimensions: 1120 x 960 x 1830mm; Nett weight: 280kg
- Servomotor controlled by precision speed control unit
- A steel beam nominally 762 x 25.4 x 12.7mm
- Space required: 3m x 3m
- Single phase earthed AC supply 240V; 50Hz is required for the speed control unit for use with the exciter motor.
.... Product Code: UVB567 - (Universal Vibration Machine)
Universal Vibration System
Specification
1] Instructional and experimental
vibration system, experiments on damping, resonance, two-weight system and
vibration absorption
[2] 6 pendulum oscillators, 2 bar-type oscillators, 1 spring-mass
oscillator
[3] Electrical imbalance exciter
[4] Electronic exciter control unit with digital frequency display and TTL
output for triggering external units
[5] Adjustable absorber with leaf spring
[6] Oil-filled damper
Technical Data
Bar,
rigid: l x w x h: 700x25x12mm, 1.6kg
Bar, flexible: l x w x h: 25x4x700mm, 0.6kg
Tension / compression springs
- 0.75N/mm
- 1.5N/mm
- 3.0N/mm
Imbalance exciter
- 0...50Hz
-
100cmg
Oil-filled damper: 5...15Ns/m
- leaf spring, wxh: 20x1.5mm
- total weight: approx. 1.1kg
-
adjustable 5...50Hz
Groove width of frame: 10mm
Drum recorder: 20mm/s, width 100mm
Polar diagram recorder: D=100mm
Dimensions and Weight
l x w x h: 1000 x 800 x 1800 mm
Opening in frame w x h: 870 x 650 mm
Weight: approx. 160 kg
Connections
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase (control unit)
Scope of Delivery
1 frame and laboratory trolley
6 pendulums
2 bars
3 springs.... Product Code: TM 0150 - (Universal Vibration System)
Universal-Automatic Compactor for Soil Testing - Universal-Automatic Compactor : ZI 3017-B ASTM D 558, BS 1377-4 It is a motor driven mechanical compactor useful for soil compaction into 100mm to 102 mm & 150mm to 152.4 mm diameter moulds. Two sets of Rammers are provided, one of 2.5 kg and arranged for 300 mm & 305 mm drop and other 4.5 kg and arranged for 450 mm & 457 mm drop. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the soil layer. When the rammer reaches the required height the pawl release the rammer which falls freely on soil surface. The release mechanism is operated by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The base plate of the specimen mould is to be fitted to the rotating base plate of the instrument which marks 1/5” revolution per stroke. The equipment is suitable for operation on 230 V, 50 Cycles, Single Phase, A.C. supply moulds are to be ordered separately.....
Product Code: NSOL-T20 - (Universal-Automatic Compactor For Testing Lab for Soil Testing Lab)for Soil Testing - SAMPLING TUBES For collection undisturbed samples of 38mm dia for triaxial strength and unconfined compressive strength either straight from the field or from a sample of larger diameter. The wall thickness is maintained approximately 17 per cent. Both relieved and unrelieved sampling tubes are available. In the relieved type of tube, the internal diameter is relieved by about 0.5mm (inside clearance 2%) beyond approx. 19mm length from the cutting edge of the tube. This is most suitable for highly cohesive soils. In the unrelieved type, the internal diameter is uniform through out. This type is most suitable for soil of low cohesion. These 38mm dia tubes are available in different lengths. ZI 3079 UNRELIEVED (a)150mm, (b) 200mm, (c) 225mm (d) 300mm long. ZI 3080RELIEVED (a) 150mm (b) 200mm, (c) 225mm, (d) 300mm long.....
Product Code: P81 - (Unrelieved/ Relieved For Testing Lab for Soil Testing Lab)
Upper Extremity Exercise Station
.... Product Code: HMEDLAB-PHTY-10003 - (Upper Extremity Exercise Station)
Upright blackboard with stand - Short upright blackboard and stand, suitable for moveable daily specials, can be moved anywhere. Not for outside use. Custom range of colours, styles and sizes are available.....
Product Code: BOARDS009 - (Upright blackboard with stand for Whiteboard Lab)
Equipment for Education, Engineering and Vocational Training - UPS Trainer & UPS Training Kit - The UPS trainer is a very versatile training system,has been designed to explain a very interesting and frequently used switching based power supply - The UPS (Uninterrupted Power Supply). The product is designed keeping in mind that a student can understand each block of UPS in a very easy way. Various test points have been provided so that one can check inputs and outputs of each block contained. Being different from a conventional block diagram internal structure of blocks is also shown. AVR (Automatic Voltage Regulator) is presented in such a way that a student can readily understand its functioning and pin configuration. Since UPS is different from an inverter because its switching changeover time is less than 3 mS which is very less so a computer system doesn't get reboot. In depth explanation of PWM switching technology, which is one of the most important feature of UPS A Low cost product demonstrating all basic concepts of UPS Various test points are provided so that one can easily measures the voltages of different sections Designed considering all safety standards Provided with a detailed Operating manual Technical Specifications Input : 190 to 260 V 10%, 50 Hz Output : 230 V Transformer specifications Input : 12 - 0 - 12 V Outputs : 0, 190, 220, 240, 260 V 18 - 0 for battery charging Experiments than can be performed Study of PWM Technology To understand the overall functioning of UPS Trainer Study of AVR transformer section of UPS To study the UPS circuit in load condition To identify different faults and to study the systematic procedure of their troubleshooting in UPS circuit....
Product Code: CON-011-NE - (UPS Trainer & UPS Training Kit for Vocational Training and Didactic Labs)
UPS Trainer – UPS Trainer Experimentation with UPS is a very versatile training
system, has been designed to explain a very interesting and frequently
used switching based power supply-The UPS (Uninterrupted Power Supply).
When electrical utility power fails or drops to an unacceptable level,
UPS are key in saving and protecting valuable computer data. UPS
equipment provides power conditioning, power regulation and, in case of
power outages, provides the crucial backup power needed for an orderly
shutdown of computer processes and files. UPS are also used for
emergency power supplies for Hospitals, data centers, municipalities,
industrial and commercial centers to supply power in case of power
failure from main supply authority.
In depth explanation of PWM switching technology, which is one of the most important feature of UPS
A Low cost product demonstrating all basic concept of UPS
Various test point are provided so that one can easily measure the voltages of different sections
Designed considering all safety standards....
These containers can be used for collecting a wide range of smaples of sputum, urine etc. Moulded in
polypropylene these contianer have excellent contact clarity and the cap has built in seal that makes it completely leakproof.
Material
:Polypropylene
Size: 30 ml
Size: 60 ml....
Urine Containers Description: Leading manufacturer & exporter of urine container. Also offering analytical instruments, biology instruments, biology lab equipments, chemistry instruments & chemistry lab equipments.....
Product Code: NLAB-0412 - (Urine Containers for School Science Lab)Equipment for Education, Engineering and Vocational Training - FEATURES PC interface through USB port Software supports Win9x/XP/NT/ME/2000 Can program EPROM, EEPROM & FLASH MEMORY FLASH/EEPROM erased by software commands Supports file formats of Binary & Intel Hex Programming voltage and algorithm selected by software Supply voltage: +9V, 500mA from DC Adapter DEVICE SUPPORT: EPROMs: AMD/MMI, Atmel, Intel, NEC, NS, ST, Holtek, Macronix, SST, Winbond, MTP etc. EEPROM/FLASH: AMD, Atmel, Winbond, Intel, SST, SyncMos, Linkage, Macronix, ST, Dallas, EON, LinkSmart, Mosel_Vitelic, PTC, AST, PMC, AMIC, BenchMarq etc. SERIAL EEPROM: Atmel, ST, AKM, ROHM, ISSI....
Product Code: NPLT-EC003 - (USB Based EPROM Programmer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - USB Based Micro Controller Programmer FEATURES PC interface through USB port User friendly menu-driven software Software supports Win9x/XP/NT/ME/2000 Supports Microcontrollers from various manufacturers Supports file formats of Binary, Intel Hex & JEDEC Programming voltage and algorithm selected by software Supply voltage: +9V, 500mA from DC Adapter Device update possible DEVICE SUPPORT: MPU: Atmel, Intel, Microchip, Philips, SST, Winbond, Signetics, Syncmos, Motorola etc. PLD: Atmel 16/20/22 Series....
Product Code: NPLT-EC001 - (USB Based Micro Controller Programmer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Support devices with Vcc from 1.2V to 5V. Extremely fast speed. Built with 48 universal pin-drivers. PC hosted mode and stand-alone mode. Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip. ISP/ICP programming capability available via ISP/ICP adaptor. Only IC manufacturer approved programming algorithms are used for high reliability. (+5%~-5%) and (10%~-10%) Vcc verification enhances programming reliability. Advanced and powerful functions. Production mode start chip operation at the moment the chip is inserted in the socket properly. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one touch step. Password can be set for project files and production volume control Batch command combines device operations like program, verify, security into a single command at any sequence. Serial numbers generators are available as standard or customer-specific functions. Log file is useful for quality tracking. Over-current and over-voltage protection for safety of the chip and programmer hardware. WINDOWS XP/Vista compatibility Device Updates: XELTEK updates software and device algorithm regularly. View the latestDevice List . Download the current software version free of charge . Updates are available by mail at a nominal charge. XELTEK also adds devices upon customer’s request at its option. Accessories: Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, software CD (include: install software, user manual), register card Optional accessories: adaptor in varies packages.....
Product Code: NPLT-EC017 - (USB Interfaced Ultra High Device Programmer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Supports 73,295+ IC devices from 272 manufacturers and continuing. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 1 GB NAND in 108 seconds. Built with 144 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins. The programmer operates in either PC hosted mode or stand-alone mode. Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip. Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad. A CF (compact flash) card stores the project files. In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability. Over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows Vista and Windows XP x32/x64 Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip inser tion in Production Mode. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. Log file provides production quality tracking. CE and ROHS Compliant DEVICE UPDATES: XELTEK updates software and device algorithm regularly. View the latest Device List. Download the current software version free of charge at Download Center. XELTEK also adds devices upon customer’s request at its option. VOLUME PRODUCTION SOLUTIONS: By operating multiple programmers simultaneously, you can use them in a high volume production environment. Cluster the programmers for flexible and easy volume production. Optional Compact Flash card is necessary to store user data, and device algorithm in stand-alone operation. For most operations, XELTEK recommends the 256MB size. Click here for more information about Volume Production Solution HARDWARE & ELECTRICAL SPECIFICATIONS: Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP PC interface: USB2.0 (High speed) Stand-alone memory: Compact FLASH Card Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A ITEMS INCLUDED: SuperPro 5000 Programmer with a DIP48 Adapter AC adapter Software CD USB2.0 Cable User's Manual Registration Card OPTIONAL ACCESSORIES: Adapter in various packages CF card for stand-alone operation Go to Previous message | Go to Next message | Back to Messages | Full Headers Reply Reply All Forward Forward Mail Search WelcomeInboxNewFoldersMail Options Copyright © 1994-2012 Yahoo! Inc. All rights reserved. Terms of Service - Copyright/IP Policy - Guidelines NOTICE: We collect personal information on this site. To learn mor....
Product Code: NPLT-EC021 - (USB Interfaced Ultra-Fast 144 Pin Standalone Universal Programmer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES ? Programs high-density Flash memory devices at near theoretical minimum programming times (Program+verify INTEL28F320W18, 32Mb less than 13.5s) Device Support: ? EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration Serial PROM, FLASH Memory (NOR and NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic. Package Support: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP,TSOP, TSOPII, SOP, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, µBGA, CSP, SCSP etc. Standard 48 pin universal pin-drivers in universal package. No adapters are needed for DIL devices. Universal pin-drivers are expanded to 100 pins by replacing the standard DIL48 module with PEP3000 module. Local Storage Media through PCMCIA Slot, Compact FLASH Card (Optional) Standard Package: Main unit, DIL 48 Module, AC Adapter, CD-ROM, User's Guide, USB Cable Optional Accessories: PEP3000 Pin-driver Expansion Pack, Package Adapter, CF Card Advanced hardware features minimized Bounce noise. Only IC manufacturers approved algorithms are adopted. Supports 50,000+ devices from up to 100 IC manufacturers including MEMORY, MCU, PLD. Free life-time software update. Three working modes: PC-hosted mode via USB port for R&D, Stand-alone mode for production, Terminal mode for customer application. Pin continuity and wrong chip insertion check prevent chips from accidental damage. Over-current and over-voltage protection for programmer hardware. Clustering programming system, a characteristic volume production solution. Several units work together in stand-alone mode like a multi-site production programmer. Advantages over traditional gang programming: No special gang adapter and s/w are needed. Supports more devices and algorithms update more quickly. Meets budget flexibly. Starts with a single unit, then, add more to increase throughput with business growing. Safer for the production chain because a single unit faulty will not stop whole production. Higher throughput. Each unit starts working as soon as a new chip is inserted, No need for synchronous start of all the units. Programs and Verify 32MB Flash Memories within 18 Seconds Up to 100 Pins Universal Pin-drivers Supports 50,000+ Devices including 1.5V devices High Programming Quality PC Hosted (USB), Stand-alone and Terminal Three Modes in One Unit Powerful and Intelligent Software Operator friendly control software combines many powerful functions with ease of use. Down to 1.5V low voltage devices are supported directly. Software supports WINDOWS 98/ME/NT/2000/XP.....
Product Code: NPLT-EC020 - (USB Interfaced Ultra-High Speed Standalone Universal Device Programmer for Vocational Training and Didactic Labs)
USB Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0078 - (USB Microscope for Science Lab)Equipment for Education, Engineering and Vocational Training - Uses of LCR Bridges Trainer Uses of LCR Bridges Trainer....
Product Code: ETKN-0725 - (Uses of LCR Bridges Trainer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Using Wheatstone Bridge to measure Resistance Trainer Using Wheatstone Bridge to measure Resistance Trainer....
Product Code: ETKN-0726 - (Using Wheatstone Bridge to measure Resistance Trainer for Vocational Training and Didactic Labs)Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name
suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.
Material :Polypropylene
Size: 375 x 350 x 130mm....
UV-YIS Spectrophotometer India
....
