|
|
| Product
Code:
NPLW-0101 |
This vial has an O-ring in the cap that makes it absolutely leakproof. Like other storage vials
this vial can also be used for storage purposes at temperatures as low as -190°C.
Material :Polypropylene / Popyethylene
/>
Size: 2.0ml ... |
|
|
|
|
|
|
STORAGE VIAL-INTERNAL THREAD |
|
| Product
Code:
NPLW-0102 |
Another addition to the range of storage vials is this vial which has internal thread in it.
The cap fitted with an O-ring screws in to the vial and makes it a leakproof storage vial.
Material :Polypropylene / Popyethylene
/>
Size: 2.0ml
NPLW-0102A-S ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0103 |
Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets
are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterlization or incubation.
/>
Material :Polypropylene
|
|
|
|
|
|
|
| Product
Code:
NPLW-0104 |
These polypropylene tubes excellent option for RIA, coagulation & bacteriology etc. The cap
in screwed on to the tube & hence this tube can be filled up to the brim.
Material :Polypropylene / Polystyrene
/>
Size: 16 x 100mm Ext. Thread ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0105 |
This transparent polypropylene cap for Test Tubes Proves to be an excellent protection to the contents to
the tubes.The grooves inside the cap tighten the fitting on the tube while the outer groove wouldhold identification labels.The built in seal ring would set
in the tube making the combin ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0106 |
This autoclavable Stand is perhaphs the most commonly used Test Tube Stand in various laboratories. For
better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia
tubes where as the base has corre ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0107 |
A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four
25mm dia holes & eight 19mm dia holes in its top plate. The base has matching hemispherical wells & 16 verticalpins for drying tubes surrounded by a
trough to catch drippings. This autocla ... |
|
|
|
|
|
|
TEST TUBE STAND (WIRE PATTERN) |
|
| Product
Code:
NPLW-0108 |
An economical substitute for wire racks, here are these submersible, autoclavable racks
which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath
and maintain their stability even in agitated w ... |
|
|
|
|
|
|
TEST TUBE STAND-P.C (3 TIER) |
|
| Product
Code:
NPLW-0109 |
These ingenious racks with a 3-tier design provide clear view of the tube contents &
convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque.
These autoclavable Racks can withstand sub-fr ... |
|
|
|
|
|
|
TEST TUBE STAND-P.P (3 TIER) |
|
| Product
Code:
NPLW-0110 |
These ingenious racks with a 3-tier design provide clear view of the tube contents &
convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque.
These autoclavable Racks can withstand sub-fr ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0111 |
This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this
rack can be used for tubes of ¢30mm, ¢20mm, ¢17mm & ¢12mm
Material : Polycarbonate ... |
|
|
|
|
|
|
UNIVERSAL REAGENT RESERVIOR |
|
| Product
Code:
NPLW-0112 |
This Universal Reagent Reservoir is a graduated single reagent reservoir with maximmum volume
of 50ml, reservoir with 8 separate numbered 5ml. reagent channels & a reservoir with 12 separate numbered 5 ml. reagent channels. Made of polypropylene
these reagent reservoirs are repeatedly au ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0113 |
These containers can be used for collecting a wide range of smaples of sputum, urine etc. Moulded in
polypropylene these contianer have excellent contact clarity and the cap has built in seal that makes it completely leakproof.
Material
:Polypropylene
Size: 30 ml
... |
|
|
|
|
|
|
| Product
Code:
NPLW-0114 |
Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name
suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.
/>
Material :Polypropylen ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0115 |
This Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity.
These autoclavable flasks are provided with screw caps to prevent leakage.
Material :Polypropylene
Size: 25ml, 50ml,
100ml, 250ml, 500ml, 1000ml ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0116 |
This Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent &
unbreakable character. Solutions can be poured easily by sueezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can
be aimed wherever required.
... |
|
|
|
|
|
|
| Product
Code:
NPLW-0117 |
Bottles are also made of Low Density Polyethylene and are therefore translucent and unbreakable.
The distinguishing feature that these bottles contains is the builtin delivery tube making it a one-piece Wash-Bottle. These Bottles are graduated on the
outer surface to give an approximate idea ... |
|
|
|
|
|
|
| Product
Code:
NPLW-0118 |
This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals
& reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The buil in depressions on two sides provide excellent
grip while holding this bottle.
... |
|
|
|
|
|
|
| Product
Code:
NPLW-0119 |
These wash bottles made of polyethylene have wide mouth that enables easy fillings as well as
cleaning. The unique feature of the cap is through the top closure and stem moulded in one piece.
Material : Low Density Polyethylene
/>
Size: 500 ml ... |
|
|
|
|
| |
EDUCATIONAL EQUIPMENTS
