Available for bulk tender supply, exports & turnkey lab projects worldwide. Send us your tender BOQ for a fully compliant quote.
CNC Lathe Trainer Machine
The CNC Lathe Trainer Machine is one of our Educational CNC Machines products, manufactured in Ambala Cantt and exported for laboratory training, testing and research.
CNC Lathe Trainer Machine.
Servo is a servo motor based CNC Trainer machine. We have
successfully implemented Servo technology in our Trainer machines. Now
it is possible to provide hands on experience to students to most of the
machine tool industry norms. Rapid travel of 10,000 mm/min and Fanuc /
Siemens emulated keyboard imparts necessary industrial grade machine
experience to students.
Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.
Also,
PLC allows HYTECH machines to be operated remotely. Hence problem
detection and eventual solution can be attained within minutes.
Specifications:
| Bed Type | Flat / 45 Degrees Slant |
| Keyboard Type | Fanuc Emulated / Standard |
| Chuck Size | 100 mm (Dia) |
| Chuck Type | Hydraulic / Manual |
| Maximum Turning Diameter | 70 mm |
| Maximum Turning Length | 250 mm |
| Center Height | 100 mm |
| Swing over Cross Slide | 80 mm |
| Swing Over Bed | 200 mm |
| Distance between Centre | 320 mm |
| Controller | Hytech with CutViewer-United Kingdom |
| Control System | PLC Based Control System |
| Operating Software | CutViewer - United Kingdom |
| Positioning | 0.005 mm |
| Repeatability | +/- 0.005 mm |
| Resolution | 0.001 mm |
| Spindle Motor | AC Servo |
| Spindle Motor Capacity | 2 HP |
| Spindle RPM | 100 to 4000 RPM with VFD |
| Spindle Nose Taper | A 2-3 / MT 3 |
| Axis Motor and Drive | Servo Motor with Servo Drives (Mitsubishi / Siemens) |
| X Axis Travel | 100 mm |
| Z Axis Travel | 300 mm |
| Ball Screw X / Z | Ø25 x 5 - C3 Class |
| Programmable Feed Rate | 0 to 1,200 mm/min |
| Rapid Travel | 1,200 mm/min |
| Turret Type | Automatic |
| Number of Stations | 4 / 8 |
| Tool Cross Section | 12 mm x 12 mm |
| Boring Bar Size | 16 mm |
| Tailstock Base Stroke | 170 mm |
| Tailstock Actuation | Hydraulic/ Manual |
| Lubrication | Automatic |
| Coolant | Automatic |
| FMS Compatibility | Provided |
| Dimension in mm | 1480 x 800 x 1200 mm |
| Power Supply | 415V, +-2% 50 Cycles, 3 Phase |
For similar products visit at main page of Educational CNC Machines.
Send us your tender BOQ — we'll respond with a fully compliant manufacturer quote within 24 hours. Trusted by institutional & government buyers worldwide.
Other laboratory equipment we manufacture, from the same range as the CNC Lathe Trainer Machine.
