LAB CODE: CGEN-0001
Safety Goggles - Protects eyes
CGEN-0001A: Safety Goggles Clear (Can be used over normal spectacles)
CGEN-0001B: Safety Goggles Dark
CGEN-0001C: Safety Goggles Clear Small
LAB CODE: CGEN-0005
Beam with notches graduated for rider use with zero at center. Six point arrestment. The beam is raised for working. Knives and planes best quality agate. Pans are of stainless steel concave inwards.
Capacity : 200gm.
Sensitivity : 0.2 mg.
Pan Diameter : 7.5 cm.
LAB CODE: CGEN-0008
Triple Beam Balance are specially designed to handle weighing solids and powder. Three notched and tiered beams with center reading . Indicating sliding masses giving total weighing capacity of 610 gm. The capacity can be increased up to 2610 gm. by using supplementary masses. Spring loaded zero adjust compensator and magnetic damping are provided for fast setting and reading.
LAB CODE: CGEN-0009
Balances single pan balance, capacity 311gm. x 10 mg. with FOUR BEAMS each provided with a non-removable slider and graduated 0 to 200 x 100gm., 0 to 100 x 10gm., 0 to 10 x 1gm. and 0 to 1gm. x 10 mg. respectively. Additional masses are not required. With zero adjustment and stainless steel pan 90 mm. diameter with two pouring spouts and handle. Height of stirrup 175 mm. Magnetically damped ...
LAB CODE: CGEN-0010
Two pan balance for accurate and rapid weighing up to 2 Kg. when used with supplementary masses. The balance has a cast alloy base and featured angled beam with center reading poises, magnetic damping, spring loaded zero adjust compensator, precision ground knives and cross braced aluminum alloy beam.
LAB CODE: CGEN-0020
Nickel plated burner tube with rotatable air regulator & cylindrical riffled connector, mounted on base, fitted with stopcock to control gas. To be used with LPG gas.
LAB CODE: CGEN-0023
Nickel plated burner tube with regulated air regulator and connector, mounted on steel base, to be used with Butane / Propane gas. 3 preset positions on the air regulator for air / gas mixing.
LAB CODE: CGEN-0024
Nickel plated burner tube with regulated air regulator and connector, mounted on steel base to be used with Butane / Propane gas.
LAB CODE: CGEN-0026
Bunsen Burner Methane - For natural (methane) gas, has air regulator and slot shape orfice. Nickle plated brass mixing tube connector, mounted on chrome plated steel base.
LAB CODE: CGEN-0030
6-Place, Stainless steel, size 360 x 260 x 135 mm. high, 110 mm. internal depth with integral constant level device and 750W heater with overheat protection device. Removable cover has six 85 mm. diameter holes each fitted with a set of stainless steel rings.
LAB CODE: CGEN-0032
With fan-shaped end, on galvanized steel wire handle. Bristle Nylon
Dia. of Head : 11 mm.
For Tubes Dia. : 10 - 12 mm.
Dia. of Head : 29 mm.
For Tubes Dia. : 16 - 25 mm.
LAB CODE: CGEN-0039
A suction type filler for measuring and volumetric pipettes.
* Rubber squeeze bulb with valves
* 50cc capacity
* Withstands acids and other hazardous chemicals
* Features 3 flow control valves, that are opened by squeezing
LAB CODE: CGEN-0043
Rubber bulbs for filling pipettes.
· Ideal for filling pipettes, etc., especially with corrosive or harmful chemicals
· Pear-shaped bulbs available in 5, 15 and 50ml capacities
· Dropper teats available in small and large sizes
LAB CODE: CGEN-0047
Made of seasoned hardwood, polished, with clamping screws. Rods are approx. 460 x 16 mm. Single base size 200 x 100 mm. Double base size 290 x 110 mm.
Burette Stand, Single
Burette Stand, Double
LAB CODE: CGEN-0048
A single speed hand driven machine consisting of a die casted parts and a steel pinion and worm drive. Screw clamps the machine to the bench. Finished in grey colour. With removable crank handle.
Tubes: 2 x 15 ml.
Tubes: 4 x 15 ml.