Available for bulk tender supply, exports & turnkey lab projects worldwide. Send us your tender BOQ for a fully compliant quote.
Continuous Stirred Tank Reactor
Made in our own plant in Ambala Cantt, the Continuous Stirred Tank Reactor is supplied to colleges, technical institutes and industry for chemical engineering work, in single units or bulk. Part of our Chemical Engineering Lab Equipments range.
The Continuous Stirred Tank Reactor (CSTR) is designed for studying homogeneous liquid-phase reactions under steady-state conditions. The reactor contents are continuously mixed so that the composition remains uniform throughout the vessel, with the outlet stream having approximately the same composition as the reactor contents.
The unit is particularly suitable for demonstrating a non-catalytic, homogeneous second-order liquid-phase reaction under ambient conditions.
To study the performance and characteristics of a Continuous Stirred Tank Reactor.
To study the progress of a suitable chemical reaction under steady-state conditions.
To determine the reaction rate constant.
To investigate the effect of reactant flow rate and residence time on reaction performance.
Samples can be collected from the reactor outlet for subsequent laboratory analysis.
| Parameter | Specification |
|---|---|
| Reactor Type | Continuous Stirred Tank Reactor (CSTR) |
| Reaction | Non-catalytic homogeneous liquid-phase reaction |
| Operating Condition | Ambient |
| Reactor Material | Stainless Steel |
| Reactor Capacity | Approx. 2 Litres |
| Feed Tanks | 2 Nos. |
| Feed Tank Material | Stainless Steel |
| Feed Tank Capacity | 20 Litres each |
| Feed Circulation | By compressed air |
| Flow Measurement | 2 Nos. Rotameters |
| Flow Control | Needle valves provided with respective rotameters |
| Stirrer | Stainless Steel impeller and shaft |
| Stirrer Drive | FHP Motor |
| Pressure Regulator | 0–2 kg/cm² |
| Pressure Gauge | Bourdon Type, 0–2 kg/cm² |
| Safety | Safety valve in compressed-air line |
| Sample Collection | Reactor top outlet |
| Stopwatch | Electronic |
| Piping | Stainless Steel and PVC |
| Control Panel | ON/OFF switch, mains indicator and associated controls |
Compressed Air: 1 HP, 2 CFM
Electrical Supply: 220 V AC, Single Phase, 0.5 kW
Water Supply: Required
Drain: Required
Laboratory Requirements: Suitable instruments, glassware and chemicals for analysis.
For a catalogue image, this should be shown as a proper bench-mounted chemical engineering CSTR trainer with two stainless-steel 20 L feed tanks, two rotameters, central 2 L stirred stainless-steel reactor, pressure gauge/regulator and control panel—not simply as a generic laboratory reactor.
For similar products visit at main page of Chemical Engineering Lab Equipments.
Send us your tender BOQ — we'll respond with a fully compliant manufacturer quote within 24 hours. Trusted by institutional & government buyers worldwide.
Other chemical engineering equipment we manufacture, from the same range as the Continuous Stirred Tank Reactor.
.jpg)
