• Send Enquiry
  • Login
  • Sign Up

Technical Training Systems

Technical Training Systems - Engineering Training, Engineering Lab Equipment. Engineering Training Systems Exporters. Engineering Lab Equipment - Over decades of dedicated experience in the laboratory educational equipment manufacturing, Naugra Export brings its expertise in Engineering Lab Equipments & Models. Engineering Training Lab Setup, Engineering Lab Experiments Setup Equipment, Engineering Equipments & Models, Engineering Lab Equipments Suppliers India

2-stroke Petrol Engine, Cutaways Models for engineering schools

TTSS-NE-0001

Accurate section of a real 2-stroke engine, technical teaching equipment for engineering
, showing every detail, carburettor, ignition, etc. The suction-exhaust-transfer channels are especially highlighted so as to make is easy to learn the cycle.

  • Piston displacement 46 cc
  • Air cooling
  • Electronic ignition
  • Box carburettor

4-stroke Petrol Engine Model, Cutaways Models for engineering schools

TTSS-NE-0002

Complete with sectioned, technical teaching equipment for engineering
carburettor and coil ignition, cooling system, distribution system, spark coil, etc. During the combustion phase a bulb lights up to simulate the mixture ignition.

  • Operated: Manually (Through a Crank Handle)
  • Equipment Layout: On Base

....

4-stroke Petrol Engine with Mono-jetronic Electronic Injection Model Cutaways Models for engineering schools

TTSS-NE-0003

During the combustion phase a bulb lights up to simulate the mixture ignition, technical teaching equipment for engineering
.

  • Mono-jetronic
  • Lambda probe
  • Coil single ignition
  • Sensor

Direct Injection 2-stroke Diesel Engine Model, Cutaways Models for engineering schools

TTSS-NE-0004

Direct injection, technical teaching equipment for engineering
, complete with injection pump, injector, volumetric compressor, cooling system, etc.

In order to simulate the active stage of the cycle a small bulb lights up during the expansion phase.

Indirect Injection 4-stroke Diesel Engine Model, Cutaways Models for engineering schools

TTSS-NE-0005

Indirect injection, technical teaching equipment for engineering
complete with injection pump, injector, pre-chamber, preheating glow plug, cooling system, distribution circuit, etc.

In order to simulate the active stage of the cycle a small bulb lights up during the expansion phase. 

Multi-point Electronic Injection I.C. Engine Model, Cutaways Models for engineering schools

TTSS-NE-0006

Built using original parts, technical teaching equipment for engineering
, this single-cylinder model reunites all the main parts making up a modern petrol engine with multipoint electronic injection and ignition-integrated control unit. Special care has been taken with the cutaway views of the electro-injector, throttle body, control unit and LAMBDA probe.

  • Overhead camshaft (....

Steam Engine Model, Cutaways Models for engineering schools

TTSS-NE-0007

Educational model, technical teaching equipment for engineering
of a modern horizontal steam engine with piston valve control. The model can be put in motion by turning the flywheel, thus showing the manner of operation of the engine and of the built-on centrifugal governor.

  • Operated: Manually (Through a Crank Handle)
  • Equipment Layout: On B....

Wankel Engine Model, Cutaways Models for engineering schools

TTSS-NE-0008

Rotating engine model, technical teaching equipment for engineering
true to the original and complete with cutaway carburettor. The rotor (triangular piston), operated by the driving shaft, rotates inside the stator thus clearly showing the different phases.

During the compression phase a small bulb lights up to simulate the petrol ignition. Light metal construction. ....