Elastomers Abrasion Tester India

•    Elastomers Abrasion Tester is the simplest and safest way to determine the abrasion resistance of rubber, or frictional loss of any elastomer over a predefined distance.
•    The rubber abrasion test is one of the most important and widely used tests for simulating a rubber product’s abrasive exposure in its end environment.
•    Fixed into a quick clamp sample holder, the test specimen is precisely guided across the rotational drum.
•    Upon test completion, sample weight is taken to compare the loss factor.

Features:
•    Stiff Aluminum machine frame.
•    Pre-set sample travel distance.
•    Brushless drive system.

Specifications:
•    Contact pressure for specimens expandable: up to N2.5,5.0, 7.5, 10.0, 12.5, 15.0, 17.5, 20.0
•    Approximate Dimensions (W x D x H): 760 x 360 x 320 mm
•    Heated drum: Yes
•    Diameter of roller: 150 mm
•    Length of roller: 460 mm
•    Number of revolutions of roller: 40 rpm
•    Peripheral speed of roller with abrasion sheet: 0.32 m/s
•    Approximate Dimensions of abrasion sheet (L x W): 472.5 x 400mm
•    Film tape (Width x Depth): 50 x 0.2 mm
•    Abrasion distance of specimen: 40 (20) m
•    Corresponds to roller rotations: 84 (42)
•    Angle of inclination of axle center of the specimen to Vertical position of roller: 3 degree
•    Granulation of abrasion sheet: 60
•    Specimen diameter: 16 mm
•    Specimen thickness: 6 to 15 mm
•    Maximum gripping length of specimen: 13 mm
•    Lateral feed of specimen per roller rotation: 4.2 mm
•    Number of revolutions of specimen holder for rotating specimen: 0.9 per minute
•    Power supply: 220-240V, 50Hz
•    Net Weight: 50 Kg ±10%