Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Flash Point Pensky Matrens (Closed) apparatus with NPL Ceritficate, Electrical Heating, with gas test jet and electric heater with Energy regulator. Suitable for operation on 22V, single phase, 50 Hz, AC supply. Complete in wooden carrying case. Flash Point (Closed) Pensky-Martens Apparartus same as above but without Flash Point (Open) & Fire Point Pensky-Martens Apparartus for Oil, Petroleum & Paint Testing - with NPL Certificate. Electrical heating, with gas test jet and electric heater with energy regulator. Suitable for operation on 220, 50 Hz, Single Phase, AC Supply. Complete in a wooden carrying case. Essential Extras - Thermometer IP 15C Range : -5° C to +110°C - Thermometer IP 16C Range: 90°C to +370°C Replacement Parts - Pensky-Martens Oil Cup - Pensky-Martens Lid shutter with Gas Test Jet....
Product Code: NPPT-M4 - (Flash Point Pensky Matrens (Closed) Apparatus For Testing Lab for Oil, Petroleum & Paint Testing Lab)
Flashlamp Bulbs Manufacturer, Supplier and Exporter for Physics Lab
.... Product Code: PETY-0027 - (Flashlamp Bulbs Manufacturer, Supplier and Exporter for Physics Lab)
Flashlamp Low Voltage Manufacturer, Supplier and Exporter for Physics Lab
.... Product Code: PETY-0028 - (Flashlamp Low Voltage for Physics Lab)Flask Conical, With Screw Cap & Teflon Liner Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0009 - (Flask Conical, With Screw Cap & Teflon Liner for Science Lab)
Flask Distillation, With Side Tube Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0007 - (Flask Distillation , With Side Tube for Science Lab)
Flask Erlenmeyer narrow neck, graduated Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0003 - (Flask Erlenmeyer narrow neck, graduated for Science Lab)
Flask Filtration Buchner Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0008 - (Flask Filtration Buchner for Science Lab)
Flask Flat Bottom, Narrow Neck Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0005 - (Flask Flat Bottom, narrow neck for Science Lab)
Flask flat bottom, Short Neck Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0064 - (Flask flat bottom, Short Neck for Science Lab)
Flask Kheldhal, Long Neck Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0006 - (Flask Kheldhal, Long Neck for Science Lab)
Flask Pear Shape, Single Neck Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0065 - (Flask Pear Shape, Single Neck for Science Lab)
Flask Round Bottom, Narrow Neck Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0004 - (Flask Round Bottom, narrow neck for Science Lab)
Flask round bottom, Short Neck Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NLGP-0063 - (Flask round bottom, Short Neck for Science Lab)
Moulded in Polypropylene, this Flask Stand gives a stair like top view. Every step provides execellent support to the round bottom flask at every point of contact.....
Product Code: NPLW-0036 - (FLASK STAND for Science Lab)
Flectchers Trolley for Physics Lab India
.... Product Code: PMCH-0018 - (Flectchers Trolley for Physics Lab)Fletcher Trolley Apparatus
¨ Weights and consumables included
¨ Swinging arm available for angular momentum
experiments (P2073)
¨ Accurate and repeatable results
P2072 180 cm long x 15 cm wide x 15 cm high
.... Product Code: P2072 - (Fletcher Trolley Apparatus)
Flexibility Tester for Oil, Petroleum & Paint Testing - The paint film is bent through 180o over a 6.35mm dia rod and examined for any damage, detachment or cracking of the film. The tester consists of two plates hinged at one end with the help of a 6.35mm dia rod. A stop is provided on one plate against which the painted panel can be held. Complete with x10 magnifier.....
Product Code: NPPT-M10 - (Flexibility Tester For Testing Lab for Oil, Petroleum & Paint Testing Lab)Flexible Coupling Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG091 - (Flexible Coupling Engineering Training Model for engineering schools)Flexible Manufacturing Systems....
Product Code: NE-CNC-LAT44 - (Flexible Manufacturing Systems)
Flexura lTesting Machine - 100 kNCapacity....
Product Code: FTM87 - (Flexura lTesting Machine)
Flexure Testing Machine (Motorised) for Cement Testing - It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (Rilem Cembureau Test) by single point loading. It is motorised, Mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kg/sec. A flexural test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. Diameter and spaced 100mm apart and a third roller of the same diameter equidistance from the first two and for transmitting the applied load to the opposite face of the prism. The unit is for operation on 230 volts, Single Phase, and 50 Cycles A.C. supply. Load are measured on a proving ring fitted with a sensitive dial gauge. Supplied without Proving Ring. Accessory : Proving ring, capacity 500 KN....
Product Code: NCMT-E29 - (Flexure Testing Machine (Motorised) For Testing Lab for Cement Testing Lab)
Flexure Testing Machine for Concrete Testing - The Flexure Strength Testing are designed to test flexural strength of concrete beams. The design provide maximum rigidity throughout their working range. The load is applied by the downward movement of the piston. A spacer is for testing different size of beams. The load is indicated on a calibrated bourdon tube type load gauge of range: 0 - 100 kN x 0.5 kN (0- 1O,000 kgf x 50 kgf). The load gauge is calibrated against National Council for Cement and Building Materials Certified Proving Ring. Flexure Testing Machines 1. Light weight, rugged high strength frame 2. Double action hydraulic pump 3. Self-aligning roller assembly 4. Hydraulic jack provided with retraction spring 5. For testing beams of 100 x 100 x 500mm and 150 x 150 x 700mm....
Product Code: NCOT-C38 - (Flexure Testing Machine For Testing Lab for Concrete Testing Lab)
Flight Demonstration Wind Tunnel....
Product Code: Aerodynamics-0005 - (Flight Demonstration Wind Tunnel)
Equipment for Education, Engineering and Vocational Training - Flip Flops Trainer Flip Flops Trainer....
Product Code: ETKN-0322 - (Flip Flops Trainer for Vocational Training and Didactic Labs)
Flip N Fraction Geoboard With Circle Cuts - Flip N Fraction Geoboard can be used both the sides. It has square grid
pegs on one side and circular pegs on other side. Studens can use
circular side to identify the fraction for halves, quarters, thirds,
fifths, up to twelfth provided with plastic circular fraction disk
fraction up to 1/12.
Measure 20cm x 20 cm
One set of plastic Circle Cuts up to 1/12....
This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. ....
Product Code: NPLW-0037 - (FLOAT RACK for Science Lab)
Float Steam Trap, technical teaching equipment for engineering - Heat Transfer Training Systems and Heat Lab Engine Trainers....
Product Code: NEMHTM28 - (Float Steam Trap - Heat Transfer Training Systems and Heat Lab Engine Trainers for engineering schools)Flow Boiling Demonstration
....
Flow Channel
The channel consists of a clear acrylic working section of large
depth to width ratio incorporating undershot and overshot weirs at the
inlet and discharge ends respectively. Water is fed to the streamlined
channel entry via a stilling tank to reduce turbulence. Water
discharging from the channel is collected in the volumetric tank of the
Hydraulics Bench and returned to the sump for recirculation. A dye
injection system incorporated at the inlet to the channel permits flow
visualization in conjunction with a graticule on the rear face of the
channel. Models supplied with the channel include broad and sharp
crested weirs, large and small diameter cylinders and symmetrical and
asymmetrical aerofoils which, in conjunction with the inlet and
discharge weirs, permit a varied range of open channel and flow
visualization demonstrations.
Experimental Capabilities:
Specifications:
- broad crested weir
- narrow crested weir
- symmetrical aerofoil
- asymmetrical aerofoil
- small cylinder
- large cylinder
.... Product Code: NEGEMG136 - (Flow Channel)
FLOW CHANNEL ACCESSORIES AND MODELS....
Product Code: Workshop Lab - FMW0027 - (FLOW CHANNEL ACCESSORIES AND MODELS)
for Oil, Petroleum & Paint Testing - Flow Cup no.4 with NPL calibration certificate. Flow Cup no.4 without NPL calibration certificate. - Simple flow cup of the efflux type is used for approximate measurements of apparent viscosity for control of consistency during manufacture and use of paints, lacquers and viscous products. Flow cups with protective skirt are made from gun metal with stainless steel orifice and are equivalent to Type B cups. Each cup is supplied with a stand having leveling screws.....
Product Code: NPPT-M8 - (Flow Cup For Testing Lab for Oil, Petroleum & Paint Testing Lab)FLOW MEASUREMENT TEST SET....
Product Code: Workshop Lab - FMW0012 - (FLOW MEASUREMENT TEST SET)
Flow Meter & Digital ph meters Description: Manufacturer & supplier of digital ph meters, mechanics
.... Product Code: NLAB-0145 - (Flow Meter & Digital ph meters for School Science Lab)
Flow Meter Demonstration
The equipment consists of a Venturi meter, variable area meter and
orifice plate, installed in a series configuration to permit direct
comparison. A flow control valve permits variation of the flow rate
through the circuit. Pressure tappings are incorporated so that the head
loss characteristics of each flow meter may be measured. These tappings
are connected to an eight tube manometer bank incorporating a manifold
with air bleed valve. Pressurisation of the manometers is facilitated by
a hand pump. The circuit and manometer are attached to a support
framework which stands on the working top of the Hydraulics Bench. The
bench is used as the source of water supply and for calibrating
volumetric each flow meter.
Experimental Capabilities:
Specifications:
.... Product Code: NEGEMG138 - (Flow Meter Demonstration)
FLOW OVER A NOTCH CHANNEL
.... Product Code: Workshop Lab - HBW0004 - (FLOW OVER A NOTCH CHANNEL)
Flow Over Weir or Open Channel Apparatus
.... Product Code: FML0013 - (Flow Over Weir or Open Channel Apparatus)
Flow Table (Motorised) for Concrete Testing - Same as above but electrically operated. Fitted with a motor, connected to the cam shaft through a reduction gear to give approximately 100 R.P.M. Suitable for operation in Single Phase 230 V A.C. 50 Cycles, Supply.....
Product Code: NCMT-E11 - (Flow Table (Motorised) -Used for measuring the consistency of pozzolana For Testing Lab for Cement Testing Lab)
Flow Table (Motorised) for Cement Testing - Same as above but electrically operated to raise and drop the table top, approx. 15 times in 15 seconds, Suitable for operation on 230 Volts, 50 cycles, A.C. supply.....
Product Code: NCMT-E9 - (Flow Table (Motorised) For Testing Lab for Cement Testing Lab)
Flow Table for Cement Testing - This is used for determining the workability of building limes. The flow table consists of a 30 cm dia polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm i.d. at base and 40mm i.d. at top, height of the mould 90mm.....
Product Code: NCMT-E7 - (Flow Table For Testing Lab for Cement Testing Lab)
Flow Table for Cement Testing - determining the flow of cement concrete. Consists of a steel table top 76.2cm (30 inch. Dia) Finely machined. The integral cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of study construction. Holes for mounting in foundations are drilled in the base plate. The ground and hardened steel cam is designed to fit and drop the table by 12.5mm. The hand wheel makes it simple to operate the table. Supplied with one conical mould with two handles, 12cm height, having17cm. Inside Dia. at the top and 25cm inner dia. at the base. Complete with a tamping rod 16mm dia x 600mm long one end rounded.....
Product Code: NCMT-E8 - (Flow Table: for determining the flow of cement concrete For Testing Lab for Cement Testing Lab)
Flow Table for Cement Testing - This used for measuring the consistency of pozzolana and also cement mortar and hydrated lime. It consists of a machined brass table top 250+/- 2.5mm dia. Mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to conical brass mould 100mm i.d. top dia and 50mm high. Accessories : Mild steel plate 25mm thick and 25cm square for fixing to the underside of the base. Same as ZI 1008 but electrically operated to raise and drop the table top, approx. 15 times in 15 seconds, Suitable for operation on 230 Volts, 50 cycles, A.C. supply.....
Product Code: NCMT-E10 - (Flow Table: Used for measuring the consistency of pozzolana For Testing Lab for Cement Testing Lab)FLOW THROUGH AN ORIFICE
.... Product Code: Workshop Lab - HBW0018 - (FLOW THROUGH AN ORIFICE)
Flow Through Orifice And Mouthpiece, technical teaching equipment for engineering
We offer high quality Flow Through Orifice And Mouthpiece to our
valuable customers. The offered apparatus is widely used for determining
the critical Reynolds number of a fluid flowing through the coil. In
addition to this, the apparatus is also used for determining the
friction factor for flow of water through helical coil.
Description:
Flow Visualisation Wind Tunnel....
Product Code: Aerodynamics-0006 - (Flow Visualisation Wind Tunnel)Flow Visualization Channel
Laminar flow visualization table is used to illustrate the
streamlines around drag bodies. The unit uses water as the flow medium. A
contrast medium (dye) is injected through small needles into the flow
area. Various drag bodies (included) can be placed in the area of flow.
In addition, sources and sinks can be simulated and illustrated using
eight additional openings in the flow area.The setup consists of a flow
channel made of Fiber Reinforced Plastic (FRP) with inlet, outlet tanks.
The flow channel is formed between the two tanks. Water enters through
the inlet connection in to inlet tank & flows through the flow
channel into the outlet tank. To regulate the flow rate of water, valves
are provided in inlet & outlet line of the flow table. The flow
section consists of base plate made of transparent plastic. A glass
plate is used to cover the base plate with a 3 mm space between the two.
The upper glass plate can be lifted & secured by chains so that
different models can be put in the flow channel. Water flows through the
space between two plates into the outlet tank. The dye is injected
through set of needles in to the flow section & can be visualized
with ease. The dye is contained in a vessel fitted with a valve to
adjust the flow rate of dye.The apparatus is supplied with bodies of
different shapes made from thin plastic. These shapes include cylinders,
rectangles & aerofoils.In order to study effect of sinks &
sources in the flow of fluid, 8 openings are provided in the base plate.
Each opening is connected to separate valves & thus can act as sink
or source.
RANGE OF EXPERIMENTS:
.... Product Code: NEGEMG127 - (Flow Visualization Channel)
FLOW VISUALIZATION WIND TUNNEL....
Product Code: Workshop Lab - ACW0008 - (FLOW VISUALIZATION WIND TUNNEL)