Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
....
Product Code: PMAG-0003 - (U Shaped Alnico Magnet For Physics Lab)
U Shaped Magnet for Physics Lab India
.... Product Code: PMAG-0013 - (U Shaped Magnet for Physics Lab)
U Tube Manufacturer, Supplier and Exporter for Physics Lab
.... Product Code: PFMC-0037 - (U Tube for Physics Lab)Equipment for Education, Engineering and Vocational Training - UJT and UJT Relaxation Oscillator Trainer UJT and UJT Relaxation Oscillator Trainer....
Product Code: ETKN-0717 - (UJT and UJT Relaxation Oscillator Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - UJT Firing Circuit Of SCR for Power Electronics Training Labs UJT Firing Circuit Of SCR for Power Electronics Training Labs....
Product Code: PEC-035-NE - (UJT Firing Circuit Of SCR for Power Electronics Training Labs for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - UJT Firing Circuit Trainer UJT Firing Circuit Trainer....
Product Code: ETKN-0716 - (UJT Firing Circuit Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - UJT Relaxation Oscillator Trainer for Power Electronics Training Labs UJT Relaxation Oscillator Trainer for Power Electronics Training Labs....
Product Code: PEC-004-NE - (UJT Relaxation Oscillator Trainer for Power Electronics Training Labs for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES: 5,131 devices supported and growing, E/EPROM, FLASH, Micros, EPLD, CPLD. Supports down to 1.8V low voltage devices. Allows eight chips to be programmed simultaneously. Socket modules are isolated to each other. Each module is built with 48 pin universal pin-drivers. No adapter is needed for DIL chips. No family PACK is needed for any package. Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP, BGA, CSP adapters up to 48 pins. Device specific adapters up to 100 pins are available. Ultra-high programming speed. Programs 28F800B5 in less than 12 seconds. Stand alone or PC-hosted modes operation in one unit (Dual modes). Connects to a PC via printer port. PC hosted software is compatible with Windows XP/2000/NT/ME/9x. Built in key-pad, 16x2 LCD and FLASH memory card for algorithms and customer data file (32Mb standard and expandable to 256Mb) for stand- alone operation. Device insertion and poor-pin-contact check protect chip from damages. Over-current protection prevents pin-drivers from damages. Auto-run mode starts programming automatically upon detection of chip insertion. Free software update from internet . One-year warranty. Suitable for mass production of DVD, mobile phone, PC, printer, monitor, game player, network equipments, PDA, MP3, POS, GPS, digital camera etc. DEVICE UPDATES: XELTEK updates software and device algorithm regularly. You (can get the latest software) may download the current software version free of charge at http://www.xeltek.com/pages.php?pageid=10 Updates are available by mail at a nominal charge. XELTEK also adds devices upon customer's request at its option. Power supply : Input 100V-240VAC,Output 5VDC, 12VDC, 24VDC. Cable: DB-25 one-one (0.8m long)....
Product Code: NPLT-EC023 - (Ultra Fast Universal Gang Programmer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Support devices with Vcc from 1.2V to 5V. Extremely fast speed. Built with 48 universal pin-drivers. PC hosted mode and stand-alone mode. Under PC hosted modes the programmer is controlled by a PC via USB2.0 (high speed) to program a chip. Under stand-alone mode the programmer is controlled via the keypad and the LCD display. A CF card is used to store the project files. User can operate multiple units to construct a concurrent multiprogramming system thank for the stand-alone mode. ISP/ICP programming capability available via ISP/ICP adaptor Only IC manufacturer approved programming algorithms are used for high reliability.±5% and ±10% Vcc verification enhances programming reliability. Advanced and powerful functions. Production mode start chip operation at the moment the chip is inserted in the socket properly. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one touch step. Password can be set for project files and production volume control. Batch command combines device operations like program, verify, security into a single command at any sequence. Serial numbers generators are available as standard or customer-specific functions. Log file is useful for quality tracking. Over-current and over-voltage protection for safety of the chip and programmer hardware. WINDOWS XP/VISTA compatibility Device Updates: XELTEK updates software and device algorithm regularly. View the latestDevice List . Download the current software version free of charge . Updates are available by mail at a nominal charge. XELTEK also adds devices upon customer’s request at its option. Accessories: Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card Optional accessories: adaptor in varies packages, CF card for stand-alone operation.....
Product Code: NPLT-EC019 - (Ultra High Speed Economy Universal Programmer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Ultra Low Frequency Sine Wave Oscillator Trainer Ultra Low Frequency Sine Wave Oscillator Trainer....
Product Code: ETKN-0718 - (Ultra Low Frequency Sine Wave Oscillator Trainer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Features: Supports 64,096 IC devices from 254 manufacturers and continuing.. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 1 GB NAND in 108 seconds. Built with 144 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters available for various package types up to 144 pins. 4 independent programming modules operating concurrently for high speed programming. USB2.0 interface to a PC for high speed programming. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability. Over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows Vista and Windows XP x32/x64 Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip insertion in Production Mode. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. Log file provides production quality tracking. DEVICE UPDATES: XELTEK updates software and device algorithm regularly. View the latest Device List . Download the current software version free of charge at Download Center . Updates are available by mail at a nominal charge. XELTEK also adds devices upon customer's request at its option. HARDWARE & ELECTRICAL SPECIFICATIONS: Device Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND) n, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic. Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP,TSOPII, PSOP,TSSOP,SON,EBGA, FBGA, VFBGA, GA, CSP, SCSP etc. PC interface: USB2.0 (High speed) Stand-alone Function: None Power supply. AC Adaptor: Input AC 100V- 240V; Output: 12V/6A. ITEMS INCLUDED: Main unit with a DIP48 Adapter AC adapter Software CD USB2.0 Cable User's Manual Register Card OPTIONAL ACCESSORIES: Adaptor in varies packages CF card for stand-alone operation.....
Product Code: NPLT-EC022 - (Ultra-High Speed Intelligent Universal Gang Programmer for Vocational Training and Didactic Labs)
Ultra-Structure of Cell Manufacturer, Supplier and Exporter for Biology Lab
.... Product Code: BBOT-0026 - (Ultra-Structure of Cell for Biology Lab)Equipment for Education, Engineering and Vocational Training - Ultrasonic Digital Distance Meter Trainer Ultrasonic Digital Distance Meter Trainer....
Product Code: ETKN-0719 - (Ultrasonic Digital Distance Meter Trainer for Vocational Training and Didactic Labs)Ultrasonic Instrument - The pulse velocity in a material depends on its density and its elastic properties, which in turn are related to the quality and the compressive strength of the material. It is therefore possible to obtain information about the properties of components by sonic investigations: 1. Uniformity of the concrete 2. Cavities, cracks, defects due to fire and frost 3. Modulus of elasticity (general indication only) 4. Concrete strength....
Product Code: NDTE-C6 - (Ultrasonic Instrument For Testing Lab)
Ultrasonic Measurement Lab - Liquid Cell for Velocity Measurement. Microcontroller based LCD. Ultrasonic Measurement Lab
Ultrasonic Measurement Lab is a very useful training system for studying
the various parameters of ultrasonic wave, like velocity and distance
measurement. With the help of this setup, we can determine the velocity
of ultrasonic wave in liquid with a high degree of accuracy. consists of
two parts a training board and a liquid cell. The training board
contains Ultrasonic sensors, used for distance measurement and object
detection.
Liquid Cell for Velocity Measurement
Microcontroller based LCD
Ultrasonic Transducers as a Distance Meter
Ultrasonic Transducers as a Object Detector
Precise Signal Conditioning
Self-contained and easy to operate
Learning material CD....
Ultrasonic Transducer Trainer - Ultrasonic Transducer Trainer - compact and user friendly learning
platforms to provide a modern, portable, comprehensive and practical way
to learn Technology. Each TechBook is provided with detailed Multimedia
learning material which covers basic theory, step by step procedure to
conduct the experiment and other useful information. Ultrasonic
Transducer Explorer TechBook 2312 is very useful instrument for Students
as well as for practicing Engineers to get thorough knowledge about
principles & operation of Ultrasonic Transducers used in Industries
Ultrasonic Transducer as a distance meter
Ultrasonic Transducer as a proximity switch study
Long distances can be measured
Buzzer indicator
Self-contained and easy to operate
Signal conditioning, instrumentation circuitry
Exhaustive course material & references
On Board Touch Switch....
Ultrasound Equipment Description: Engaged in the manufacturing and export of ultrasound equipments, operation theatre lights, anasthesia apparatus, medical disposables, infant incubator, suction apparatus, stethoscopes, haemocytometer, x-ray machine.....
Product Code: NLAB-0410 - (Ultrasound Equipment for School Science Lab)Ultrasound Machine Description: Exporters and suppliers of ultrasound machine, portable ultrasound machine, 3d ultrasound machine, diagnostic ultrasound machine, vascular ultrasound machine, therapeutic ultrasound machine etc.....
Product Code: NLAB-0411 - (Ultrasound Machine for School Science Lab)
for Soil Testing - Spring type unconfined compression testing apparatus can be used either in a laboratory or in field. SPECIFICATION : Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg 0.4kg. 0.8kg and 1.6kg/mm, a calibrated mask and one set of 50charts, in a metal carrying case. SPARES & ACCESSORIES: Chart set of 50 Calibrated mask Spring set comprising one each of stiffness 2n/mm, 8 n/mm and 16 n/mm Coning tool for 38mm sample, (female) Coning tool for 38mm sample, (male) Tripods stand wooden, for using the instrument in field.....
Product Code: NSOL-T54 - (Unconfined Compression Test Apparatus (Spring Type Autographic) For Testing Lab for Soil Testing Lab)
Unconfined Compression Test Machine We are Leading Supplier of Unconfined Compression Test Machine in India. We also bulk supply Unconfined Compression Test Machine for laboratory tensers. Unconfined Compression Test Machine Features : The electric strain unconfined compression tester is used to determine un-confined compression strength of cohesive and semi-cohesive soils. The test is used to supply information needed for the design and construction of civil engineering structures. Technical Specifications of the Electric Strain Unconfined Compression Tester Lift plate journey per revolution of the wheel : 0.2 mm stroke of the lift plate : 30 mm Lifting speed : 1.8mm/min ±15% axial load : 0.6 KN Diameter of the cylinder : Ф39.1 ....
Product Code: Civil Engineering0030 - (Unconfined Compression Test Machine)
for Soil Testing - This is a hand operated instrument for determining the unconfined compression strength of soil specimens of diameter ranging from 38mm to 100mm. Load on the sample is applied gradually by a hand operated load frame and loads are measured on a sensitive proving ring attached to the load frame. SPECIFICATION : Comprises of a hand operated load frame, cap. 5000 kgf with screw jack for loading, handle and strain dial gauge bracket, adaptor for proving ring, conical seats and male/female coning tools for 38mm dia samples. Supplied without proving ring, dial gauge.....
Product Code: NSOL-T55 - (Unconfined Compression Tester Proving Ring Type (Hand Operated) For Testing Lab for Soil Testing Lab)
for Soil Testing - Unconfined Compression Tester Proving Ring Type (Motorised) - This is similar to NSOL-T55 with the added advantage of a motorised drive permitting constant rates of stain. SPECIFICATION : Comprises a screw operated load frame, cap.5000kg with a gear box and motor drive giving 1.25 mm/min. Rates of strain, a pair of cone seating, adaptor for proving ring, and stain dial gauge bracket. Supplied with one pair of male/female coning tools for 38mm dia samples but without ring and dial gauge. Suitable for operation on 230 V, Single Phase A.C. Supply. ACCESSORIES : Coning tools in pairs (Male & Female) for samples having diameter 38mm, 50mm, 75mm & 100mm....
Product Code: NSOL-T56 - (Unconfined Compression Tester Proving Ring Type (Motorised) For Testing Lab for Soil Testing Lab)Equipment for Education, Engineering and Vocational Training - Under Voltage Mnitoring Trainer Under Voltage Mnitoring Trainer....
Product Code: ETKN-0720 - (Under Voltage Mnitoring Trainer for Vocational Training and Didactic Labs)
Under Water Sealed Drainage System
.... Product Code: HMEDLAB-MDSP-10010 - (Under Water Sealed Drainage System)Trainer.jpg "Understanding LCD TV (Colour Television) Trainer for Vocational College Trainers Teaching Labs")
Understanding LCD TV (Colour Television) Trainer –
....
Trainer.jpg "Understanding Local Area Network (LAN) Trainer for Communication Teaching Labs")
Understanding Local Area Network (LAN) Trainer -
....
Equipment for Education, Engineering and Vocational Training - Unijunction Transistor Trainer Unijunction Transistor Trainer....
Product Code: ETKN-0721 - (Unijunction Transistor Trainer for Vocational Training and Didactic Labs)
Universal AC Motor - 5....
Product Code: ADM-091 - (Universal AC Motor - 5 for Electric Motors Teaching Labs)Universal Coupling Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG087 - (Universal Coupling Engineering Training Model for engineering schools)Universal DC Motor - 5....
Product Code: ADM-151 - (Universal DC Motor - 5 for Electric Motors Teaching Labs)
Universal Development Platform - Xilinx FPGA Daughter Card. Xilinx CPLD Daughter Card. Xilinx Virtex 2 FGPA Daughter Card (Optional).....
Product Code: VLS-TR-06 - (Universal Development Platform for VLSI Design Training Systems Teaching Labs)
CPU: Boards compatible for 89C61X2, PIC 16F877A, LPC 2148, AT mega16 microcontrollers. ISP Programming facility. On-board interface like 8 I/P switches, 8 Led output, 16x2 LCD display, 4 digit 7-segment display, I2C like 24c512, DS1307 RTC, 8 bit ADC & DAC, Temperature sensor DS18B20 LM35 temperature sensor, 4x4 matrix keyboard, Relay, Buzzer. 24 I/O Lines Provided on a 26 pin FRC Connector for external interface In-built Power supply of +/- 12V, +5V.....
Product Code: ES30 - (Universal Embedded Trainer for Embedded System Trainers Teaching Labs)
Universal Gates Trainer - Universal Gates Trainer The Universal Gates Trainer NV6552 is an elite
training system for the digital laboratories. It is useful in
understanding the basic concepts and functioning of universal gates and
their use as other logic gates. This trainer describes the formation of
AND, OR, NOT, NAND, NOR, XOR and XNOR gates using NAND and NOR gates
which are called universal gates. The training system is designed in
such a way that for performing any experiment students have to connect
the links by patch cords, so it is very helpful for students to learn
step by step design of each gate using universal gates. Attractive input
and output sections are provided on trainer in such a manner so that
multiple experiments can be performed simultaneously.
Exclusive and compact design
Straight forward representation of Universal Gates
+5V SMPS Adaptor provided with the trainer for power supply
Designed by considering all the safety standards
Provided with an extensive manual
Low cost trainer including illustration of logic gates design using universal gates....
Universal Governor Apparatus
Governor Mechanism: Four
different types of governor mechanism with spring and weights
1. Watt Governor
2. Porter Governor
3. Hartnell Governor
4. Proell Governor
Variable speed Motor HP,Digital RPM Indicator with Proximity sensor
.... Product Code: UG54 - (Universal Governor Apparatus)
Universal Governor Apparatus The setup consists of a drive Motor & governor spindle mounted vertically on a rigid baseplate. A belt & set of reduction pulleys drive the governor at lower speed than the motor.Set of different governor mechanisms are provided to be mounted on spindle. A graduated scale is fixed to the sleeve and guided in vertical direction. The center sleeve of the porter and proell governor incorporates a weight sleeve to which weights may be added. The Hartnell governor provides means of varying spring rate and initial Compression level. This enables the Hartnell governor, to be operated as a stable or unstable governor. The governor speed is increased in steps to give suitable sleeve movements possible. The speeds and sleeve movement are recorded. The readings are repeated at each stage. The result may be plotted as curves of speed against sleeve position. Further tests are carried out by changing the value of variable at a time to produce a family of curves. Experimental Capabilities: • Determination of characteristic curve of sleeve position against speed of rotation. • Derivation of the actual controlling force curves from the above characteristic and comparison with theoretically predicted controlling force curves, • The effect of varying the mass of the center sleeve. (For Porter and Proell Governors)• The effect of varying initial spring compression (For Hartnell Governor.) Technical Specifications: • Drive Unit- D.C. motor 0.25 hp. 0-1500 RPM• Speed Control Unit • Belt and Pulley system to give spindle speed 1 00 to 500 rpm.• Governor mechanisms: - Watt - Porter - Hartnell - Proell • Set of weights• Springs: 2 nos. of different stiffness of same length. ....
Product Code: NEGEMG173 - (Universal Governor Apparatus)
Universal Governor Apparatus for engineering schools....
Product Code: TML004 - (Universal Governor Apparatus for engineering schools)
Universal Grinder - Universal grinder with internal Grinding , external Grinding Surface, swing over table 200mm, work piece length 500mm with full range of accessories....
Product Code: UGS43 - (Universal Grinder)
Universal Heat treatment Setup.
Type: KIA-60AB; Work power: 3><380V(415V,440V)50-60HZ; The range of operating voltage 340V-
420V(370-450)V AC; Output power 60 KW;
- Fluctuating frequency 50-200KHZ; Output current;
400-1800A; Timing (Heat time .e Retain time Cooltime) 1-99S.
- The flow rate of cooling water 0 .08-0 .16 Mpa 7.6L/Min; Water temperature protection point 40°C ;
Duty cycle 100% (40degree room temperature);
- Weight Mainparts:38Kg extension:33kg; Size Main
parts: 640*280*550; Extension: 510*260*410;
- Applications: Drill tip heat shaping; Heat treatment
Quenching; Forging Melting; Soldering and brazing
.... Product Code: KIA-60AB - (Universal Heat treatment Setup.)
Equipment for Education, Engineering and Vocational Training - Universal IC Tester is a Table-Top version, designed as a powerful tool for manufacturers, servicing engineers, R&D personnels to test a wide range of IC's of Digital, Analog, CPU & RAMs.Tests most of the 6 to 40 pin ICs in DIP package. The list includes 74/54, 40/45, 93/96 series ICs, EPROMs, RAMs, peripheral ICs, microprocessor (8088/8085/Z80/6502), operational amplifiers, voltage comparators, transistor arrays, optocouplers, analog switches, voltage followers, timers, A to D converters, D to A converters and miscellaneous analog ICs. Automatic testing of variety of ICs. Potential free 20 pin ZIF socket for testing analog ICs and 40 pin universal ZIF socket for testing digital ICs are provided. 16 character x2 line LCD dot matrix display and 16 keys keyboard for man to machine communication and easy operation. Single step mode enables the user to test the IC step by step. Self test facility to test the internal modules of the IC tester automatically at power on and also through 'SELF TEST' key of the keyboard. Audio alarm to user whenever it is required. SPECIFICATIONS IC PACK : Digital ICs up to 40 pins and analog ICs up to 20 pins in DIP package. IC TYPE : Tristate, open collector & bidirectional TTL/CMOS digital ICs also analog ICs as per list. TEST BY : Truth table comparison for digital ICs. Functional test of output for various input conditions for analog ICs. ZIF : 20 pin DIP ZIF for analog ICs and 40 pin Universal ZIF for digital ICs. KEY : 16 keys DISPLAY : 16 character x 2 line SUPPLY VOLTAGE : 230V AC.....
Product Code: NPLT-EC030 - (Universal IC Tester for Vocational Training and Didactic Labs)
Universal IC Tester Can test more than 450+ ICs - Tests a wide range of Digital ICs such as 74 Series, 40/45 Series, 8085, 8086, Z80,8255, 8279, 8253, 8259, 8251, 8155, 6264, 62256, 8288, 8284, Tests Op-amp, 555, Transistor Arrays, Analog switches, Opto couplers and Others Tests 7- Segment display of common cathode & common anode type Auto search facility of all Digital ICs 40 pin DIP ZIF sockets 28 Keys Touch Keypad and 9 Digit Seven Segment Display.....
Product Code: DIC-TR-02 - (Universal IC Tester TR-02 for IC Tester & Digital Teaching Labs)
Universal IC Tester TR-03: Can test more than 1500+ ICs Tests a wide range of digital IC\\\'s such as 74 Series, 40/45 Series, 8085, 8086, Z80 ,8255, 8279, 8253, 8259, 8251, 8155, 6264, 62256, 8288, 8284 Tests a wide range of analog IC\'s such as Op-amps, Timers, Transistor Arrays, Analog switches, Opto- couplers, ADC, DAC, Voltage Regulator, etc Tests 7- segment display of common cathode & common anode type Auto search facility of all Digital ICs 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display.....
Product Code: DIC-TR-03 - (Universal IC Tester TR-03 for IC Tester & Digital Teaching Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Universal IC Tester with Membrane ASCII Keypadis a Table-Top version, designed as a powerful tool for manufacturers, servicing engineers, R&D personnels to test a wide range of IC's of Digital,Analog, CPU & RAMs. Tests Digital and Analog ICs from 3 to 40 Pins. Built in self-diagnostic functions to ensure error free testing of IC. 16 character x 2 line backlit LCD display and sealed Membrane type Alpha Numeric keyboard Automatic testing of variety of ICs. 2 nos. of potential free 40 pin ZIF sockets for testing analog and digital ICs. Single step mode enables the user to test the IC step by step. Audio alarm to user whenever it is required. IC PACK : Digital ICs up to 40 pins and analog ICs up to 20 pins in DIP package. IC TYPE : Tristate, open collector & bidirectional TTL/CMOS digital ICs also analog ICs as per list. TEST BY : Truth table comparison for digital ICs. Functional test of output for various input conditions for analog ICs. ZIF : Two 40 pin DIP ZIFs for analog and digital ICs. KEY : Membrane type Alpha Numeric 50 Keys Keyboard. DISPLAY : 16 character x 2 line backlit LCD SUPPLY VOLTAGE : 180V to 270, 50Hz single phase. RANGE OF ICs THAT CAN BE TESTED : DIGITAL : TTL, CMOS ICs including SSI, MSI, LSI, Functions including Gates, Buffers, Drivers, Flip-flops Counters, Shift registers, Latches, Multiplexers, Parity generators, Analog switches, CPUs, Microcontrollers, Peripherals, Static RAMs, Non volatile rams, Serial EPROMs etc. LINEAR : Transistor Arrays, Timers, Analog switches, Optocouplers, Display drivers, Line drivers, and Latch drivers, 7 segment display, LCD display, from 16 character by 1 row Upto 40 characters by 2 rows, Real time clocks, Analog to Digital converters upto 16 bit resolution and upto 40 pin Devices. Digital to Analog converters. Op-Amp’s (8 Pin 14 Pin, 16 pin). Comparators (8 pin, 14 pin, 16 pin) Op-Amp and Comparators (combined) Voltage followers (8 pin, 14 pin) Voltage regulators (Both +ve and –ve), DPM ICs, DOT / BAR display drivers, PLLs, VCOs. Waveform Generator, Sample & Holds, PWM Generators.....
Product Code: NPLT-EC031 - (Universal IC Tester with Membrane ASCII Keypad for Vocational Training and Didactic Labs)
Universal IC Tester-1....
Product Code: ICTester-10003 - (Universal IC Tester-1)
Universal Impact Testing Machine
Load : 250 - 3000KGF
- Drive : Electrical ,415V
- Max Test Height: 410mm
- Depth of spindle below bade:180mm
- Nett Weight: 450KG
- Height: 1127MM
.... Product Code: 3000KGF - (Universal Impact Testing Machine)Equipment for Education, Engineering and Vocational Training - Universal Logic Gates and Applications Trainer Universal Logic Gates and Applications Trainer....
Product Code: ETKN-0722 - (Universal Logic Gates and Applications Trainer for Vocational Training and Didactic Labs)
Universal Microcontroller Trainer
.... Product Code: Workshop Lab - WLE0045 - (Universal Microcontroller Trainer)
Universal Milling Machine The machine designed and developed by us is highly efficient and assure to render consistent performance for longer period of time. Our Universal Milling Machines are equipped with well-defined industry-required features such as rugged construction, long lasting performance, high strength, easy installation, long functional life, flexible, corrosion resistant, and low maintenance requirement. Apart from stringent monitoring and evaluation of production process, we conduct stringent testing of the finished product on various quality parameters that allow us to serve premium range of Universal Milling Machines in various grades and specifications, both in standard and customized range.....
Product Code: UMM44 - (Universal Milling Machine)
Universal Motor for AC Repulsion Motor for Electrical Lab for Electric Motors Teaching Labs - For demonstrating to students the complete know of the Basics, Components, Starting methods, Speed-Torque, Wear & Tear & Maintenance of these motors packaged in small rating. Students can make connections of their own with the help of the terminations provided for study of features viz Starting methods, Speed-Torque, Effect of reduced voltage, Blocked rotor test. Technical Specs : Power ratings available : 350W / 750W Voltage Input: 230V AC 50hz or 230 DC RPM: 6000 / 10000 Single / Double shaft extension, SPDP, IP23, IC01, B3, Class-B, Short time duty, Solid yoke. List Of Experiments : Starting by AC DOL Starter Starting by reduced AC voltage starter. Starting by DC Starter Speed control by DC SCR Drive Load test & No load test of machine Speed-Torque Analysis Efficiency Analysis Blocked rotor test Cold Resistance & Hot Resistance Motor Operation parameters Basic Overhauling Know how....
Product Code: ADM-007-NE - (Universal Motor for AC Repulsion Motor for Electrical Lab)
Equipment for Education, Engineering and Vocational Training - Universal Motor Speed Control Trainer for Power Electronics Training Labs Universal Motor Speed Control Trainer for Power Electronics Training Labs
.... Product Code: PEC-003-NE - (Universal Motor Speed Control Trainer for Power Electronics Training Labs and Vocational Training and Didactic Labs)
