• Send Enquiry
  • Login
  • Sign Up

Electricity & Cell Lab

Physics Electrical lab equipment supplies, Laboratory equipments electronic kits supplier, exporter India dynamos, ac electrical dynamo generator, dynamo model ac, bench meter, voltage measuring meter, current measuring meter, electromagnetic bell model, demonstration of electric bell model, demonstration dynamo, dynamo model, dynamo generator model, electric motor, electric motor 3d model, Daniel cell, gravity cell, Making electricity from chemicals, crocodile clips connectors, copper wire bare, bare bright copper wire, bare copper wire spool, contact key single, Single Contact Key, single key contact, auto transformers, variable auto transformer, transformer auto, ac ammeters, digital ammeters, moving coil ammeter, Sliding contact Rheostat made by resistance wire wound also single Tube Protected & rotary rheostat for electronic experiments & technology education projects and kits, Electricity and Conductivity Supplies and aids.

Auto Transformer for Physics Lab

PETY-0001

Continuously variable voltage auto transformer, protected type.

Ballistic Galvanometer for Physics Lab

PETY-0002

Used for measurement of small quantities of electrical charge.

Banana Plugs for Physics Lab

PETY-0003

4mm Pin, 18mm long spring insert and hard plastic body. Overall lenght of plug 40mm.

Banana Plugs Socket for Physics Lab

PETY-0004

Moulded hard body, threaded with fixing nut. Plated brass insert with solder pin.

Capacitance Box for Physics Lab

PETY-0005

4 DIAL: Multiplier - x 0.001, x0.01, x0.01, x1 mtd. Polyster capacitor, accuracy 3%

Capacitance Substitution Box for Physics Lab

PETY-0006

Capacitance substitution box ideal for use in industrial and educational environments.

Charge and Discharge Key for Physics Lab

PETY-0007

Used in charging & discharging of a capacitor. C.P. brass strips & pillars. Three terminals fitted on a thick bakelite plate of high insulation. Contact resistance 2 milliohms approx. Maximum current 5 amps. Dimensions : 185 x 15 x 45 mm

Circuit Board for Physics Lab

PETY-0008

Consists of a base board, complete with terminals, a set of metal connection pillars & a number of clips on flexible connection strips & accessory units; enabling a wide variety of electrical circuits to be constructed quickly & easily.

Worcester Circuit Board Kit for Physics Lab

PETY-0009

Consists of a base board, complete with terminals, a set of metal connection pillars & a number of clips on flexible connection strips & accessory units; enabling a wide variety of electrical circuits to be constructed quickly & easily. The phosphor - bronze strips are so designed that when flexed a little in the fingers, they are easily slipped over the pass where their natural spring....

Coil 120 Turns for Physics Lab

PETY-0010

Each centre hole coil is wound on a plastic former & is provided with 4 mm socketed terminals.

Coil 2400 Turns for Physics Lab

PETY-0011

Each centre hole coil is wound on a plastic former & is provided with 4 mm socketed terminals.

Coil 240 Turns for Physics Lab

PETY-0012

Wound on a plastic bobbin to fit a standard ‘C’ core. The coil is centre hole & provided with 3 mm socketed terminals.

Commutator Pohl\'s for Physics Lab

PETY-0013

Used in experiments on Hysterisis. Six cups for mercury in bakelite tray. Six terminals for connections & an insulating handle. Maximum current 5 amps. Dimensions 140 x 140 x 80 mm

Conact Key Double for Physics Lab

PETY-0014

A contact arm & three metal studs mounted on a bakelite base with three brass terminals. The centre terminal is common connection to the arm & the other two terminals connected to the other studs.

Contact Key - Morse Code Key for Physics Lab

PETY-0015

A brass C.P. spring arm with press knob & two brass terminals. All mounted on bakelite base 80 x 55 mm.

Crocodile Clip for Physics Lab

PETY-0016

Spring loaded serrated jaws, clamping screw for wire, wires may also be soldered. Insulated 4mm sockets.
a) Black b) Red

Demonstration Dynamo for Physics Lab

PETY-0017

This model uses the same basic assembly as the electric motor, mounted on a base plate which also carries a hand drive pulley 120 mm in diameter coupled to the smaller dynamo pulley by a rubber belt. Electric output is via a pair of 4 mm socket & a light emitting diode is provided as simple output indicator. The model may also be used as motor on a 4 to 8 volts DC supply.

Demonstration Dynamo Model A.C for Physics Lab

PETY-0018

A simple demonstration of a Dynamo Model mounted on a wooden base. Hand driven by a gear. Simplified open frame construction which can be readily understood without detriments to its essential similarity to real machine. A 2 pole armature wound by enamelled copper wire to rotate in U shape magnet in pivot. While in rotation process through the gear wheel by hand, the bulb provided glows.

Demonstration Dynamo Model A.C and D.C for Physics Lab

PETY-0019

A simple dynamo model to differentiate AC from DC. Mounted on a wooden base. Two bulbs are provided for AC & DC current(s). The model is hand driven & when operated, the AC bulb shows flickering light to indicate AC current while the other bulb glows fully indicating DC current.

Demonstration Dynamo Model D.C for Physics Lab

PETY-0020

A simple demonstration of a Dynamo Model mounted on a wooden base. Hand driven by a gear. Simplified open frame construction which can be readily understood without detriments to its essential similarity to real machine. A 2 pole armature wound by enamelled copper wire to rotate in U shape magnet in pivot. While in rotation process through the gear wheel by hand, the bulb provided glows.

Demonstration Electric Bell for Physics Lab

PETY-0021

Mounted on a wooden base, all parts easily visible, rigid constructions to show the connections on a vertical stand.

Demonstration Electric Motor for Physics Lab

PETY-0022

A model of the simplest form of DC motor; having 3 armatures - 2 pole, 3 pole, & 4 pole, wound with enamelled copper wire, & a permanent magnetic field provided by a removable bar magnet. The construction is completely open & all components are readily observable. A disc type commutator is incorporated & external connection to the phosphor - bronze bushes is by means of a pair of 4....

Demonstration Meter for Physics Lab

PETY-0023

Moving coil type. Basic sensitivity of meter is 5mA, 100mV f.s.d. The meters can be used to demonstrate the working principle of AC or DC ammeters or voltmeters with interchangeable dials. Different dials are available. Housed in a Plastic/Wooden case, with plastic in front and rear.
a) Wooden case b) Plastic case

Double C-Core and Clip for Physics Lab

PETY-0024

Laminated core to form a roughly rectangular core 92 x 56 x 20 mm approx. With a cross section of 20 x 12 mm & is cut across the middle to produce 2 equal ‘C’s. A strong spring steel strip is provided to hold the two halves together.

Electric Motor With Newtons Disc for Physics Lab

PETY-0025

Newton Colour Disc Mounted On
Newton Colour Disc Mounted On Motor - Motor Mounted on a wooden base 90 x 90 x 100 mm, workable on 2 to 4 volt DC with fan blade & Newton’s colour disc.

Festoon Bulb for Physics Lab

PETY-0026

12V 3V for use with smoke cell & multiple light source.

Flashlamp Bulbs for Physics Lab

PETY-0027

Bulbs with MES cap suitable for flash Lamp.
a) 1.2v b) 2.5v c) 3.5v d) 4.5v e) 6v f) 12V

Flashlamp Low Voltage for Physics Lab

PETY-0028

Bulbs with MES cap suitable for flash Lamp.

Inductance Box for Physics Lab

PETY-0029

4 DIAL: MULTIPLIER - x1mH, x10mH, x100mH, x1H
               AIR/ FERRITE CORE, ACCURACY ±3% at 1KHz
Also available in
1 DIAL, 2 DIAL, 3 DIAL, 6 DIAL

Insulated Socket Terminal for Physics Lab

PETY-0030

With moulded captive head, 4mm socket, nuts and washers. The screw top will connect ordinary connecting wires and spade terminals.
a) Black b) Red

Interscale For Demonstration Meter for Physics Lab

PETY-0031

For use with interscale demonstration meters. Each dial comprises a laminated plastic panel with sealed moulded box at one end which contains the shunt or voltage multiplier appropriate to the scale.

Jockey Knife Edge for Physics Lab

PETY-0032

For Wheatstone Bridge & Potentiometers. Metal knife edge mounted in plastic handle, 90 mm long x 12 mm dia with terminal at the upper end.

Knife Switch Double for Physics Lab

PETY-0033

Double Pole Double Throw, mounted on a bakelite base with screw holes for bench fixing etc. Overall Dimensions 100 x 15 x 30 mm

Knife Switch Single for Physics Lab

PETY-0034

Single pole double throw, mounted on bakelite base with plated spring metal contacts and screw connectors.

Lampholder for Physics Lab

PETY-0035

Suitable for mounting screw threaded type MES bulb. Round base with holes for screw mounting.

Lampholder Mounted for Physics Lab

PETY-0036

Double contact type lamp holder made of brass insert in plastic body mounted on insulated plastic base with 4mm socket terminals.

Leads for Physics Lab

PETY-0037

Insulated, PVC coated, with one end crocodile clip and at the other end banana plug.

Meter - Digital Panel Meter for Physics Lab

PETY-0038

Digital Meter for general purpose laboratory use housed in tough case use of a 3½ digit cover most of the ranges. Displays 13 mm characters; operates on mains with accuracy ± 0.3% typical. Linearity 0.2% typica. Available in ranges from 1.999mA AC to 199.9mV DC

Meter - Dual Scale Ammeter for Physics Lab

PETY-0039

With three colour coded 4 mm socket terminals & zero adjustment. Normal internal resistance 0.05 & 0.1 ohms. Available up to 3A

Meter - Dual Scale Voltmeter for Physics Lab

PETY-0040

With three colour coded 4 mm socket terminals & zero adjustment.  Available up to 15 V

Meter - Dual Sensitivity Micrometer for Physics Lab

PETY-0041

With 2  colour coded 4 mm socket terminals Available in ranges from ranges upto 50µA

Meter - Moving Coil Ammeter for Physics Lab

PETY-0042

Moving coil for D.C. measurements, Any single range 0-1, 1.5, 3, 5, 10 Amps.

Meter - Moving Coil Galvanometer for Physics Lab

PETY-0043

Moving coil type for DC use only. Sensitivity approx. 200mA/division, coil resistance 10W scale, 50 mm, long with anti - parallax mirror, is set at a convenient reading angle in plastic case with pair of colour coded 4 mm socket terminals & zero adjustment. FSD 1200 mA per division 20mA. Available upto 50mA.

Meter - Moving Coil Microammeter for Physics Lab

PETY-0044

DC measurements only, accuracy ±2% at f.s.d. scale,  with anti-parallax mirror; set at a convenient reading angle in plastic case. With pair of colour coded 4 mm socket terminals & zero adjustment. Available in ranges from ranges upto 500µA

Meter - Moving Coil Milliammeter for Physics Lab

PETY-0045

DC measurements only, accuracy ±2% at f.s.d. scale,  with anti-parallax mirror; set at a convenient reading angle in plastic case. With pair of colour coded 4 mm socket terminals & zero adjustment. Available in ranges from 1mA to 500 mA.

Meter - Moving Coil Milliammeter (Centre Zero) for Physics Lab

PETY-0046

DC measurements only, accuracy ±2% at f.s.d. scale,  with anti-parallax mirror; set at a convenient reading angle in plastic case.

Meter - Moving Coil Milliammeters and Millivoltmeters with Terminals for Physics Lab

PETY-0047

For DC Milliamp or Millivolt measurements only; accuracy to BS 89 Class index 1.5. Taut band suspension with single linear scale, 63 mm long with centre zero, is housed on projection type transparent plastic case mounted on an inclined base at a convenient reading angle. With pair of colour coded 4 mm socket terminals & zero adjustment. Momentary overload 1000%; can withstand momentary connect....

Meter - Moving Coil Millivoltmeters for Physics Lab

PETY-0048

DC measurements only, accuracy ±2% at f.s.d. scale,  with anti-parallax mirror; set at a convenient reading angle in plastic case.

Meter - Moving Coil Voltmeters for Physics Lab

PETY-0049

DC measurements only, accuracy ±2% at f.s.d. scale,  with anti-parallax mirror; set at a convenient reading angle in plastic case. Range 0 to 500 V.

Meter - Moving Iron Ammeter for Physics Lab

PETY-0050

Moving iron type or AC or DC measurements; accuracy ±2.5% at f.s.d. Available in ranges from 1A to 10A.